1986 Honda CR500

Motor Club
67 followers
#motorcycle #Gjwauto #Motorcycles #CruiserMotorcycles #reviewmotobike #reviewmotor #reviewmotorcycle
AI Generated·May contain errors
Video Summary
AI GeneratedThis video documents the museum-quality restoration of a 1986 Honda CR500 by Kaplan Cycles. Described as a \"labor of love,\" the project involved 200 hours of work and over $4,000 in parts. The result is a \"resto-mod\" that blends original factory aesthetics with modern performance upgrades, creating a machine that likely exceeds its original factory specifications.
Guys, beyond a shadow of a doubt,
we're looking at the most spectacular 86 CR500 we've ever
done here.
In the decades that I've been riding these bikes since 1986,
I restored countless ones.
This one's on the podium.
This is number one.
It was the most meticulous,
time-consuming restoration we've done on any 500 we've ever
done besides Junior's.
Junior's, we had 150 hours into it the first year.
We've got hundreds of hours into his now, but that was a race bike.
This one, we put 200 hours into it.
Why 200 hours? Well, the level of attention to detail.
You got to really get up close and personal with
it to appreciate the amount of attention to detail
that was put into this bike and a total of $4,116
in brand new parts.
Just the labor to restore the tank and the radiator shrouds. Those are
the original tank and radiator shrouds.
That was 10 hours of labor just doing that. We could have
have bought Maier plastics or aftermarket plastics tank.
Uh, I mean, in shrouds, but they don't fit like this.
These are the original factory OEM 86 CR shrouds,
the original factory 86 tank, and it's beautifully
restored to brand new condition.
The bike was obviously a nut
and bolt complete crank up rebuild of on the engine, uh, the
frame.
I guess I'll start with the engine.
The engine was completely dismantled right down
to the engine cases, which are perfect
mint originals with no welding ever done on them.
The crank was rebuilt.
Every bearing in the engine is new,
including the transmission bearings, the crank bearings.
Every seal is new.
The crank seals, the shifter seal, the kicker seal.
The cases were beautifully cosmetically restored
and repainted in the low-gloss original factory
black.
All of the hardware on the motorcycle,
all of the original factory hardware was sent
out and re-zinc plated.
There is a new engine bolt kit on it.
So some of the bolts you're looking at in the engine are new
and the bolts that hold the plastics on are new,
but all the rest of the hardware was sent out
at a tune of $325 to have it re-zinc plated
and reused OEM Honda components.
The airbox is absolutely spectacular
and completely rebuilt with a new twin air filter.
The carb is completely rebuilt with new jets,
cosmetically restored, new fuel petcock,
new fuel lines, and the attention to detail.
The right type of clamps, the brand new hose drains,
the new intake, new reeds, brand new piston, rings,
base gasket, head gasket, top end bearing, of course,
spark plug, and of course, the new FMF exhaust.
The original factory silencer was restored.
The radiators are brand new,
painted the original factory black color, all new hoses, everything.
There was no.
Not a bolt left unturned on the engine.
The frame was beautifully restored, sandblasted,
powder-coated in the original Honda color.
The original swing arm was completely restored.
It looks like it just came out of the box.
Every bearing on the motorcycle is new, new wheel bearings,
new shock bushings, new linkage bearings, new swing arm bearings,
new steering head bearings, new front wheel bearings.
The front brakes rotor
is completely restored.
The caliper is completely restored with new front brake line,
new brake line mounts.
The new, the master cylinder was rebuilt.
Forks are completely rebuilt. This is a first
year cartridge forks. You can see the finish on
the front forks is absolutely pristine.
Those were restored to the original factory color.
Even the proper hose clamps for the reproduction fork boots
are the right ones. The forks are
completely rebuilt. I'm going to refer to Rick's notes on here
so I don't leave anything out.
I'll get back to that, but there's four pages.
I'll never find it, but there's a note in
here that he used Racetech components
on some of the fork internals, so those are upgraded.
Brand new Takasago XL rim, brand new spokes.
The hub was completely restored, vapor honed and repainted.
New wheel bearings.
The original axle was sent out and re-zinc plated.
New zinc plating on the pinch bolts.
Completely rebuilt.
to a very, very high degree.
The handlebars are new Renthal bars, new Renthal crossbar pad,
brand new throttle tube grips, cable,
and new kill switch, new clutch perch and lever,
and hardware, new front brake lever,
new radiator cap, again original,
a new front fender, new front number plate
with the proper yellow number plate backing.
Everything looks like it just came out of the box.
In fact, it probably didn't look this good
when it came out of the box in 86.
The original exhaust had some things in it,
so we upgraded it to a brand new Gold Series FMF gnarly pipe.
The clutch inner was replaced, brand new clutch housing.
It has a brand new outer cover,
and it has a brand new billet water pump cover here
with all new water pump components
and impeller and seal and hardware and gasket.
and new silicone radiator hoses
with new engine ice coolant you can see all the new gaskets uh
the original pegs were in mint shape
which is a hallmark if this was raced i bent mine in
the first season all new hardware it's tight
as a tick there's zero play in there the original
brake pedal is beautifully restored
the um like i said rick is meticulous and that's
the word i'll use for this restoration it's meticulous
the uh the um hose clamps are new
The shock is completely restored
with the original factory warning decals on there.
The original airbox is beautifully restored.
It has a new shock guard.
The shock was completely dismantled and rebuilt with a new bumper.
The shock spring was repainted.
The body was vapor-honed.
And look at the swing arm on this thing.
Rick did a spectacular job refinishing the swing arm.
The brake arm is spectacularly refinished.
We're almost finished.
This is, this, this,
Rear wheel was by W, especially drilled
for this drum brake assembly on the back here with new spokes,
new rim, new rim strip, new Dunlop 34 Geomax.
tires these aren't the cheap ones either
these are the expensive ones um the brakes backing plate
was restored and repainted all new hardware
a new zinc plating on all the original hardware
um just i mean it goes on and on the sprocket bolts
are new it's got a brand new Renthal
Sprocket front and rear with a new Pro-X gold chain.
Just a spectacular, every grommet on this motor,
every piece and component on this bike was either restored,
replated, or replaced with new.
Thank you.
DR.
Including even the mounting bushings and rubber components
KURTZ- Thank you.
DR.
KURTZ- Thank you, everyone.
Let's continue.
for the radiators were vapor honed.
If you come around this side here,
You'll see
The backside of the airbox,
which is normally all sandblasted and rock pelted, looks brand new.
Thank
The chain guide is brand new.
The chain slider is brand new.
It's a beautiful gloss finish on there with the gold chain.
The attention to detail on it is second to none.
It's really an absolutely spectacular restoration.
Look at the condition of the air box
and the engine covers and everything else. It's
you.
really an incredible labor of love.
And Rick worked on this thing for months, literally months,
Stig Brodersen
and came up with this work order.
It was 190 hours before he started the tank and the radiator shrouds.
So he's got 200 hours into this.
That doesn't include any of my time coming down for months
and looking over his shoulder
and where are you at with the bike and discussing what he's doing
and helping him pick out components
and authorizing purchases.
There was never, ever, ever, ever once a thought on this bike,
like, geez, can we save a buck here
or save a buck here?
It was always, how can we make this the best CR500 we've ever built?
And it is clearly, unequivocally, the nicest 86 we've ever built.
Attention to detail, like the hose clamps right here,
the attention to detail on this
is only done by someone with meticulous attention to detail.
I'm going to go over his notes right here real quick while he can
walk around and show him up and close some of the things on here.
I think I covered pretty much.
It's a Pro-X piston, and every piece that was aluminum
was refurbished to original condition, vapor honed, and or painted.
New shock bearings, linkage bearings, wheel bearings,
swing arm bearings, headset bearings,
rebuilt forks with new seals, Racetech bushings, and new boots.
That's the line I was looking for.
Rebuilt rear shock, new seal head, new bladder,
and piston band with 175 PSI nitrogen.
Relaced new XL gold wheels and spokes, MX-34 tires.
All OEM hardware was zinc-plated.
The axle springs, the rear brake cable, the swing arm adjuster plates.
All hardware except the body
and engine hardware is original factory Honda hardware,
completely zinc-plated to brand new spec.
New rear brake shoes,
new seat foam and cover.
I left that part out.
Of course, after it was assembled,
it was nut and bolt checked and tested
and ridden by him and me several times.
Every single piece of this bike was refurbished, rebuilt, or replaced.
I think I mentioned the transmission
bearings, the crank bearings, and seals.
Every gasket on the motorcycle is brand new.
It has a new gear shift lever on it.
Also, I forgot to mention that.
All new chain sliders and rollers.
I didn't mention that.
$120 in shock rebuild parts.
Brand new front fender, rear fender,
front number plate, and side shrouds with the proper
OEM Honda yellow background on it.
So that's the good news.
There's more good news.
There's pages of good news here.
All the bearings, wheel bearings, headset bearings,
front brake line, throttle cable,
clutch cable. I think I covered everything.
New wrist pin bearing. So I think I covered
everything pretty thoroughly. That's the good news.
The bad news, 200 hours labor at 150 an
hour is $30,000 plus $4,116.
That's $34,116 invested into this bike.
And on top of that, the cost of purchasing a good,
clean CRF to start with.
So you're looking at a $40,000 investment,
which is the most we've ever invested into a.
OEM plus rebuild. We've got more than that into juniors, but his is
Ohlins everywhere and special engine cylinder and everything else.
So this is a $40,000
restoration. And we sold it to our number one client,
Randy, for $25,500. The bike sold. So
we only lost $15,000 on it. You know how we do this?
We make up with it with quantity. Just
Just kidding, it's a labor of love.
But that's what our shop rates are,
$150 an hour, and the parts are what they are,
and the cost of the bike is what it is.
So we've got a lot of overhead here.
This is a legitimate, largest of its type.
It's a destination facility.
We've got a 40,000-square-foot facility
and seven new brands that we represent
between Ducati, Moto Guzzi, Aprilia, GasGas, Buell, Stark, and Bonell,
the new bike dealerships on the first floor.
This is the second floor of the museum floor.
And then above here is a new bike dealership also.
So we have two floors of our restoration shop.
We just doubled in capacity over there.
Thanks
So we'll show you some videos
of the new Resto shop soon as that takes shape.
But definitely a labor of love.
Okay.
All right.
It's an obsession bringing them to this level.
So as a reminder, I've got the link to the
presentation that you guys have.
We don't always do the bikes to this level.
I will put the link in the description.
And I will also have all of the slides,
or the links that I've put in the description,
as well as the links to my other videos.
And Rick is
So please take a look at them.
And I'll see you in the next one.
meticulous in what he does.
Have a great day.
you.
Bye.
So the 200 hours labor, maybe there's other techs that could have
Bye.
Bye.
Bye.
Bye.
done it a little faster, but his attention
Bye.
Bye.
to detail is second to none. And for that,
Bye.
Bye.
it's worth putting the extra effort in.
Bye.
Bye.
And it's going to a great home. It's going to our number
Bye.
Bye.
one client, Randy, who he purchased this and that FX
Bye.
Bye.
Bye.
Bye.
and 40 other bikes from us in the last two
Bye.
Bye.
months alone. So thank you, Randy and his wife, Dana.
They're awesome. They were here at the
grand opening of our new showroom for the whole weekend.
And I'm proud to see this bike going to him.
But I'm just looking at the triple clamps.
Check out the triple clamps on this thing.
I mean, look at this.
Honestly, I don't think they look this good
when it came from the factory.
Those have been vapor honed and polished.
It's not polished, clear coated.
All the hardware has been zinc plated.
They didn't.
It honestly...
I don't think it looked this good when it came out of the crate.
We're very proud of this build,
proud of Rick and his attention to detail and stick-to-itiveness.
Thank goodness.
We've done a couple things on the bike twice.
We had another tank on it,
another shroud on it that was actually off an 85.
Thank
The bike was done and I was like, what are we doing here?
I didn't have an 86 tank,
so we found a mint original 86 tank
and we had the shroud, so we bought the tank.
Thank you, Hank.
It was a lot of money and I think it was 650 bucks
and then he restored the tank.
you.
And, uh, and the shrouds, which was another 10 hours.
So, and of course this, uh,
this 86 seat assembly fits better on the 86 tank.
So this is, this is a no excuses bike.
Um, it's really a spectacular piece.
That's the original silencer on there.
Uh, I'm going to have Rick, uh,
do a little bit more polishing on the silencer.
I think that could be just a touch better.
That's the only critique I had on the whole bike.
Um, that's about it.
So.
I kind of wish he powder-coated the shock spring, too,
instead of painting it, but that's okay.
Next time, we'll get that.
Other than that, Rick, hey, I got
to pick on something, right? When we go to an
AHR2
Antique Motorcycle Club of America meet my buddy,
Ted, who's been building the nicest BMWs
I've seen in the world. His bikes have
been called the nicest BMWs in the world.
He had one that he was on a crusade to get a hundred points
and he spent years with that bike
and they would always 99.8 points or 99.75 points.
They'd always find something that
was perfect. So I got to say something, Rick,
and I think if anything, I think we should do a little
A little more polishing on the original factory silencer.
And I wish we powder-coated the spring.
But no, you can't pull the shock off and powder-coat it.
We're already upside down on this thing.
Again, we were...
Unless Randy wants it done.
If you want it done, Randy, I'll pull
that spring off and have it powder-coated.
But I don't think they were powder-coated from the factory.
I'm pretty sure they were painted.
But just a beautiful piece.
Obviously, a labor of love
and a spectacular investment quality classic, a museum quality
investment classic.
And this is what I would call a resto mod.
Thank you, Todd.
You know, if it was a restoration to stock,
we would have went with the stock black exhaust
and we would have went with a black chain.
But I didn't build this and we went
with stock bars. I didn't build this.
I built this the way I would want it done
and exactly the way I wanted this bike done
and the way Rick wanted it too.
He had a lot of input on it.
So those touches, the XR rims, the gold chain,
the pipe, the Renthal bars, those are the
things a racer and a rider wants
and it sets this thing above and beyond a boring stock
restoration would.
And for me, it's obviously a labor of love, something I'm...
obsessed with, and we've done more CR500s than any other company
in the world. The only other
company that's built more CR500s than us is Honda and built 500,
AJ from Service Honda. He's done
7,000 of them. We're not even close to that,
but AJ, he's the godfather of the CR500. Nobody's
better than AJ. And of course, Honda Motor Company, God bless them.
God bless Honda Motor Company
God bless America and all you guys watching.
I won't give you the pitch about being able
to ship this to your house or that we finance
it because it's sold, buddy, but it's going to a great home.
This is one spectacular piece of moto history massaged
to perfection here at Kaplan Cycles.
Thanks for watching and God bless America.
