$1150 Gaming PC Build - Intel Core i5-4690K / XFX Radeon R9 290X / NZXT S340
Oct 31, 2022
Hey everyone, it's Philip from PCPartPicker and we're going to be putting together a gaming PC
with an Intel Core i5-4690K CPU and an XFX Radeon R9 290X video card. Big thanks go out to Newegg
for helping with this build. They put together a special combo deal linked in the description below
that includes all the parts you see in this video. So let's get started. This is the Intel
Core i5-4690K CPU. It's a four core processor running at a base clock of 3.4 gigahertz and a
max turbo clock of 3.9 gigahertz. It's an unlocked processor, so paired with our Z97 motherboard,
we'll be doing some overclocking. For the price, this processor offers excellent performance.
Our motherboard is the MSI Z97S SLI Crate Edition. It's a very popular Z97 board with
plenty of functionality and also a really attractive color scheme. Now spec-wise,
the motherboard has four RAM slots supporting a total of 32 gigabytes. There's a USB 3 front
panel connector, six SATA ports with a SATA express option, two PCIe x16 slots, three PCIe
x1 slots, and two PCI slots. Now let's install the CPU. First, unhook the latch and flip it back.
Then find the pin 1 marking on the CPU and line it up with the pin 1 indicator on the motherboard.
This, along with your indentions on the socket, will ensure you place the CPU in the proper
orientation. Gently lower it vertically into place, then flip the cover back over,
removing the plastic cover. Then pull down the latch and hook it back into place.
For our CPU cooler, we chose the Cooler Master Hyper 212 Evo. It's one of the most popular air
coolers on the market right now and offers good performance at a low cost. It comes with one fan,
but there's an extra bracket included in case you want to add a second fan for a push-pull
configuration. So here we have our cooler and the mounting bracket for the back of the motherboard.
When installing the cooler bracket, note the location of the three protruding screws.
Then place the bracket so that the holes line up with the screws.
To attach the bracket, we use the included standoffs that have one side of the screw
machined flat. Then when we put that screw through the hole, you can see how the flat
part of the screw is up against the bracket to keep it from rotating. Attach the nut,
but only hand tighten for now, then repeat with the other screws. The 212 Evo includes
a socket tool so that you can use your phillips head screwdriver to tighten the nuts.
Hold off on mounting the heatsink for now. Instead, let's install our RAM. Here we have
8GB of DDR3-1600 from Mushkin. Pull back the levers and push the RAM into place.
When you push down on the RAM, the levers will lock into place.
For the case, we have the NZXT S340. It's an extremely easy to use ATX case. On the bottom
is a shroud that covers the power supply, while providing two 2.5 inch SSD mounts. There are two
120mm fans, one on the back and one on the top. The top mount also supports 140mm. The front
supports 120 and 140mm fan mounts, as well as 240 and 280mm radiators. To get to the front dust
filter, just pop off the front of the case. Then as you can see, it exposes the dust filter,
which is just attached magnetically. Before installing the motherboard, make sure to insert
the IO panel. Be careful though, it can be a tight fit and it's often really sharp. It's
really easy to cut yourself. Carefully lower the motherboard into place. Note that one of the
standoffs sticks up through the motherboard hole, so you can use that to hold it in place while
screwing it in. The next step is to install our power supply. We've chosen a Corsair RM650,
which has 650 watts and fully modular. Now fully modular power supplies make cable management a
lot easier, since you only have to manage the power supply cables that you actually need for
the build. Later on, if you need additional components, you can connect the cables as needed.
With the case shroud over the power supply, it's easier to attach the modular wires outside the
case. We'll start with the 24 pin motherboard power, making sure it's plugged in all the way.
The connectors can be a bit tight, so some force may be needed to get them in all the way.
We can power the SSD and the platter drive off one side of power cable. Next we need our 8 pin
CPU power, and then one last cable for our 290x video card. With all the cables attached, now it's
time to put it in the case. Remove the power supply mounting bracket, and then attach it to the power
supply. Route the wires through the case, and then slide the power supply into place. You'll notice
that the power supply fan is facing down. That's so that we pull in cool air from the bottom of
the case through the included dust filter. Now the S340 includes two fans, which come connected
to a molex power connector. But we'll remove the molex plug, and instead plug the fans directly
into the motherboard. Route the 8 pin through the top right cable management hole. Then route the
24 pin through the side. The motherboard power connectors may be a little bit tight, so don't
be concerned if you have to use a little bit of force. Just make sure they're both plugged in all
the way. This motherboard has three chassis fan headers, and we'll use two of them for the case
fans. They're labeled SysFan1 and SysFan2. Then plug in the HD audio cable, as well as the power
button, the power LED, and the hard drive LED. And last, plug in the USB 3 front panel connector.
For our storage, we're using a Mushkin 120 gigabyte SSD for the boot drive.
And then we're going to pair that with a one terabyte Western Digital Caviar Blue for some
extra space for our games. Now the shroud has two SSD mounts, so go ahead and remove those,
and place the caddy on the SSD, and then screw it into place. We've rounded the side of power and
data cables, and now we'll plug in the SSD. Then put it back on the shroud, slide it into place,
and secure it with the thumb screw. To mount the platter hard drive, remove the dust filter.
We're only using two screws to hold it in place, since the other two are hard to get to with the
power supply where it is. Now connect up the power and the data. Connect the drives to the
motherboard, making sure to use the two SATA 6 gigabit per second ports at the very top. Let's
install the 212 EVO heatsink. Go ahead and remove the fan now, because otherwise it'll get in the
way when we screw in the mounting bracket. And of course, don't forget to remove the plastic cover
that's over the heat pipes. The bracket screws have springs that let you position it in one of
three different spots. These are for supporting different socket types. Since our build uses
LGA 1150, you want to use the screws in the middle position. Now apply the thermal paste. Don't use
a whole tube, just about the size of a pea or a small grain of rice. Then lower the cooler into
place and set the screw bracket into the standoffs. Just get the screws started, but don't tighten
them down all the way at first, otherwise the springs and the tension will make it hard to get
the other side in. Plug the fan into the motherboard CPU fan header. It's a lot easier to reach while
the fan is detached, so do that first and then mount the fan. Our video card is an XFX Radeon
R9 290X. Now prepare the case by removing two expansion slot covers. There's a small protective
cover over the card connector, so remove that first. Then insert the video card into the motherboard
and then put the thumb screws back in to hold it into place.
Since our power supply PCIe power cable has two 6 plus 2 pin connectors, but our video card only
uses one 8 pin and one 6 pin, zip tie the dangling 2 pin connector back to keep it out of the way
and to keep it out of the GPU fan. Then plug in both power connectors and we're done. And that
wraps up the build. Thanks goes out to Newegg for sponsoring this build and providing all the
components. We've put a link to the combo deal below that includes all the parts used in this
video. We hope you enjoyed the build, and thanks again for watching!

