Looking for useful woodworking tools that won't break the bank? In this video, I'm sharing 10 woodworking tools under $40 that can help make your woodworking projects easier, more accurate, and a whole lot less frustrating!
Whether you're a beginner woodworker setting up your first workshop or an experienced woodworker looking for affordable tools and clever woodworking gadgets, these budget-friendly tools are worth checking out.
From precision measuring and marking tools to woodworking jigs, drill guides, table saw accessories, and other handy workshop tools, I'll show you how these tools work, what they're used for, and why I think they deserve a closer look.
Now, do you NEED all these woodworking tools? Probably not! But sometimes having the right tool for the job can save you time, improve accuracy, and make woodworking a whole lot more enjoyable.
In this video, we'll take a look at tools and accessories like the Milescraft JointMaster, WEN setup gauge, wheel marking gauge, woodworking T-square, drill guides, stop collars, and more. These are the kinds of affordable woodworking tools that can come in handy whether you're building furniture, making woodworking projects to sell, or just working on DIY projects in your garage workshop.
And remember, just because one woodworker thinks a tool is unnecessary doesn't mean another woodworker won't find it invaluable!
Whether you're looking for woodworking tools on a budget, woodworking gift ideas, or useful additions to your workshop, I hope you discover something new!
I found some awesome budget-friendly tools
that I think most of you guys are going to love.
But honestly, you know how it is with tools.
It's probably going to make some of you guys angry,
and you're going to yell profanities and fat jokes at your screen.
But the good news is, none of these tools are over $50.
And you know what they say, $50 is the new $10.
So technically, you're practically spending $10 on these tools.
At least that's what I tell my wife when I'm buying them.
What's wrong with them?
Chances are, you might see some tools you've never seen before.
Enough talking, let's get to tool counting.
If you can't afford or you don't have
the space for a drill press like me,
this first tool is going to be really handy.
It's a Kreg drill block. And if you watched my videos
last year, I had a MillsCraft drill block.
So you're probably thinking, how many drill blocks
do I got to own? Well, they each have different features
that come in really handy. They both
drill the same size holes, but one goes this way and one goes that way.
See how different they are?
I'm just kidding it's the bottoms of them
that are different you see this one this is the Mills
Craft and it has this v-groove in it
and this v-groove comes in handy if you got to drill holes
in a round circle or a dowel.
The v-groove also comes in handy if you got to drill into the corner
of a board. Now the Kreg drill block has a square channel
on the back of it and that groove really
helps if you got to drill in the edge of three quarter inch material
or half inch material.
Now each one of them is under 10 bucks so why not have both of them.
But don't go by me I once paid 20 bucks
to watch a turtle make out with a chicken so
my standards are pretty low.
I actually have a third drill block that's even more heavy duty.
It's made of that anodized aluminum
and what's great about this one is if you got to drill a
hole at 45 degrees you got that and if you got
to drill a hole at 30 degrees you got that on
the other side. One thing I like about this one
is it has a lot of surface to clamp it down.
And it's great if you got to put a screw
or a dowel at a 30 or 45 degree angle.
This one's small so I had to come up close.
That's what he said!
You can't talk about drill blocks without talking about stop collars.
Well you can but it's like talking about
Taco Bell without talking about the squirts.
Now these stop collars come in a set
of seven of the most common drill bit sizes.
And these stop collars are a little bit
different than your average stop collar.
Now this is the depth stops that I started using
and this is the old school depth stop.
The difference is the way they hug the drill bit
but also these are both half inch and you can see
this one has a lot more surface area
so it tends to mar the wood a little bit less. On the old
style you had a set screw that came down and dug into the drill bit.
The problem I always have with
these old school depth stops was the set screw.
You had to make sure you got the set screw
right on the land portion of the drill bit
which is the flat side and you had to make sure you
weren't really on the margin
because you can actually bend the margin so it kind of made it
a little bit more challenging when you were trying
to set your depth up and then you had to make sure
this thing stayed turned the right way
and then you got your Allen wrench and you're trying to
tighten it and it's turning and this is moving
just another thing you had to worry about when
When you're setting these up.
Whereas on this style, all you got to do is put your drill bit
in there, get it to where you want it, and then tighten it up.
You don't have to worry about where the set screw's landing
and marring up your...
You don't got to worry about where
your set screw's landing and messing up your drill bit.
And I've never had a problem with these slipping.
The only issue I had with these is because they're aluminum,
sometimes they would leave a gray mark on the wood.
I can't even get it to do it. Well it's kind
of leaving it. You see how it's turning gray?
See that? But it sands right off.
But to fix that I would just put a piece of tape on mine sometimes.
But normally I was drilling my holes before the sanding period anyway
so it didn't really matter.
Now there's more than one of these types
of stop collars that squeeze the bit on Amazon,
but this one had the most reviews,
1,600 reviews, and the highest rating, 4.3.
One of the most fundamental parts of woodworking
that everybody needs to learn how to do
is joining boards together.
Now there's a lot of expensive ways to do that and there's a lot
of budget ways to do that.
And one of the budget ways to do that is through dowels.
And the number three tool on my list was named after Snoop Dogg,
The MillsCraft JointMaster, and this is perfect for
Now, if you've watched videos on my channel before,
you've seen me use the old version
of the MillsCraft JointMaster, which was called the Joint Mate.
And as good as this thing worked, it had its limitations.
It was made out of plastic, it was kind of hard to clamp.
Where the new one's made out of solid aluminum,
it's self-clamping, it has these stops on
both sides that you can put up
to make sure you're drilling your dowel in the same spot
on each board.
It comes with all your standard size drill collets
and I have all three of them in here right now
because that's how I store it but what you would normally
do is just put in the size you're going
to drill and it comes with these plastic spacers
to help you set it up that has these different
measurements on each side and the biggest spacer has
this feature where you can put a pencil in it
and use it as a center guide.
Now the whole thing can be disassembled and reassembled in different
configurations to cover all kinds of different doweling needs.
It's really very versatile.
And for all my metric-using friends out there,
you can also get a JointMaster in metric sizes,
except in the UK where it's called a Joint Royale with cheese.
And look at how good this thing works with your stop collar.
Quabam! The next tool on my list
is this DeWalt 90 degree angle attachment.
Now they sell this in a lot of different configurations.
I think I got the one with the most value
because some of them just come with this part,
some of them just come with like these two.
I got this one for $40 and it came with all three of these.
It's under $40, like 36 bucks or something like that on at Home Depot.
Now I would say this one's probably
the most basic attachment that you would use.
And it goes on like this and then you turn it and that clicks in.
Did you see that click in?
The end of this is magnetic so it magnetizes your screws and stuff.
And now I'm about to do something
that could get me canceled in a lot of woodworking circles.
I'm about to put a DeWalt attachment on a Milwaukee drill.
That's like putting Spider-Man in a Wonder Woman costume.
I think he might be gay.
So here's what this is good for.
Say you got to get a screw in the bottom of this
and you got no room. Not even a little M12 would fit under there.
That's where this thing comes in handy.
You throw a screw on there.
I got this little cover thing.
I don't know if you guys have used one of these.
So what it's for is this sleeve covers the screw
and it holds it on the tip
so it doesn't fall off when you're driving it in.
Because when you're using this,
you got to keep one hand on here
and then one hand on the gun.
Or if you don't have that on there.
And now watch.
Well, bam.
So the 90 degree angle is all metal.
It's pretty heavy duty.
The only part that's plastic is this part right here.
But the inside's metal too.
So all you do to take this off
is push this little clip up
and then turn it and then boom.
See this, the shaft and all up the shaft is metal
and if you're really working in some tight quarters
And you don't even have room to get fit this part in
They give you this little handle that you could throw on there
and then with this handle on there
You can just turn it whatever way you... Sorry that was loud
And then with the handle on there you could just turn
it whatever way you want, say hello to my little friend
So the last attachment is this, it's a flexible rod in case you got
to screw something up your strut and around the corner
and you can use it just like this because you can put a tip in the end
of this and this is very magnetic, it's hard to actually get
the tip to come out of it or you press this button you pull that up
and now that shaft is way down there and now you can put your angle
on here and then this way you can really let your angle dangle
and look, you thought it was going to spin and hit me in the face didn't
you? Nope, now this kit didn't come with this tip, I own this already.
But it came with these four pieces right here
and now they have one that's almost
exactly the same on Amazon except it's completely the opposite.
Instead of it being yellow with black trim,
it's black with yellow trim.
But it looks to be the same kit.
If you want this same exact one that I'm showing you,
I got it from Home Depot.
They didn't have it on Amazon.
But they did have like just this on Amazon
or just this pieces on Amazon.
But I couldn't find anywhere on Amazon
where they had the whole thing except for in that black.
The next tool on my list is my marking gauge.
Now marking gauge is a lot more precise
than trying to use a tape measure and a pencil.
Even if you're making one of them carrot looking things.
The marking gauge is still much more precise,
especially if you're trying to make repeatable
cuts.
All you got to do is lock in your fence
at the measurement you want, like say you want
one inch strips,
and then you can mark out one inch strips all day long.
One place the marking gauge really shines is with wood joinery.
It works really well at doing mortise
and tenon joints, and one reason is because it
scores the fibers,
and those scored lines help guide your chisel and prevent tear out.
Another really handy thing
is how precise you can make your rabbet joints.
Like say you want to join these two boards with a rabbet.
All you got to do is put your fence on top of the first board,
let the cutting wheel drop to your bench, and then tighten it up.
Now lightly score your second board,
then go back for the second pass a little bit deeper,
and you can even do a third one if you feel like it.
Now you have a perfect line to cut your rabbet on.
While we're on the subject of accuracy and marking stuff,
probably the most used tool
on my channel is my speed squares.
I probably use these every single video. They're so versatile.
They're not my number six tool
because you probably have a speed square. If not,
These things are really handy.
I'll leave a link to the ones I use in the description.
I really like the smaller one that it comes with.
There's so many videos out there on how to use
these and the little tricks you can do with them
and each one has their own little special features
but the number six tool on my list is my Sager T-Square.
As long as you got a fairly straight
edge on one side you can make a 90 degree line
on boards up to 14 inches. Another really nice
feature is you can turn this knob
and then it's got some positive stops at some really common angles
Like say you want to do a 60 degree line,
put your straight edge to that 60 degree,
tighten your knob back up,
and now you can make that same 60 degree line all day long.
My favorite feature has to be this sliding pencil holder.
All you do is set it to whatever measurement you want, lock it in.
It comes with this mechanical pencil
that fits in the pencil holder just right.
So you can make a line and it doesn't move all over the place on you.
And if you need to sharpen the pencil, which I do, mine's really dull.
I was surprised it made that line.
There's a pencil sharpener in the back of the pencil.
Then I'll check that line with my tape measure.
And look at that.
The line's a little thick, but it's right at seven inches.
The next tool on my list are these little sanding drums.
All you got to do is put one of these in your drill.
And they work perfect for sanding inside circular or curved areas
where you can't get an orbital sander
or a square sanding block or anything like that.
They come in four different sizes depending
on what your project needs are,
and they also come with some extra sandpaper and different grits.
The next tool on my list is this little WEN setup gauge.
This thing really works good for setting up your blade height.
It's best if you know right where the center of your blade is.
You can lock in a size and then set up your drill bit depth.
One thing that's cool about this Kreg drill block
is it's exactly one inch so if you know you want
to drill something that's a half inch deep you just start at one inch
and then go up a half an
inch and then lock it in then all you got
to do is just set your stop collar to that measurement.
What's really cool about this setup gauge
is it has two different measurements if you notice on
Focus on both sides.
This side where it says down is if the blade
is coming from underneath like we did on the table
saw. This side over here is if the blade is coming from up top
and what it does it takes into account
the thickness of this little lip right here.
Now say you want to use your miter saw to set up a
rabbet. All you got to do is use this side of the setup gauge,
set it to whatever depth you want
your rabbit to be. In this case we'll say a quarter of an inch.
Now all I gotta do is lock my blade in
And then you remember that rabbet we marked out
with our marking wheel earlier?
Now I'm just going to work my way across
the board making multiple passes
until I've removed all the waste material.
Now I just got to clean up the cut a little bit with my chisel.
All right let's try it out.
Look at that.
Well bam!
I'm like a real woodworker's brother-in-law or something.
Look out look at that joint.
The next tool on my list is small but mighty,
but it's hard for me to say.
So I'm probably going to mess this up for the 20th time now.
The Wera Rapid Adapter Locking Bit Adapter.
Now what makes this thing so cool is you just pull this out like that,
and then you can slip your blade in and look,
it locks in automatically.
That's all you got to do.
And it's in there.
One hand operation.
If you got one hand with a screw gun
and you're putting it in, you don't need both hands.
You just pull this out.
Boom.
Imagine this is the screw gun in this hand.
And then, boom, put it in and it locks.
It even works on these old flat ones where there's no groove
or nothing for it to hold on to.
So, I don't know what.
Look at that.
See how it clicks in?
And it will not come out.
What is holding this thing in there?
All you got to do is like, boop, and it pops out.
You guys let me know in the comments what you think
is holding it in there.
I'm using one of those star bits
because those are always the ones that get stuck on me.
Watch this.
Oops.
I'm not leaving that in there.
I just looked like a...
An idiot.
Well, BAM!
Ready?
One more.
BAM!
Tip's still in there.
I normally don't cut out my mistakes, but I may have cut that one out.
I looked pretty stupid right there.
The name of this thing is Rapid Adapter.
It reminds me of that cartoon genie from way back in the day.
I remember he used to say, YAPLE DAPLE!
The last tool on my under $50 tool list is this table saw gauge.
The gauge makes it easier to square your blade and your fence.
All you do is put the gauge into your miter slot.
There's some adjustment knobs if you gotta make it up
and down, mine's already pretty
much adjusted.
Once you get the gauge in your miter slot,
make sure it's sitting nice and firm.
Mine has a little bit of a rock in it
from front to back, so I always make sure I put
a little bit of pressure on the front.
Start at the front of your blade by putting
the pin on the flat spot of the tooth.
Zero out the blade.
Then using that same tooth, you want to use the same tooth,
push it all the way to the back. You
could put a piece of tape on it. You could mark it with a marker.
Then slide your gauge all the way
to the back and see where you're at.
I haven't squared mine up in probably more than six months.
So my blade is out 14.5 thousandths of an inch.
So I need to adjust mine.
So you see when I push on the back of the blade,
it almost goes, it goes to zero.
So I know my blade needs to go that way on this, on the backside.
Now my saw, every saw is going to be different,
but mine has an adjustment knob on the back
that, or I'm sorry, an adjustment bolt that I can loosen up
and then I can slide the back
of the saw to the left or right.
And like we saw, I need to slide it more towards the fence.
Now we'll check the fence.
So when I came over, I pushed down on the gauge.
It must have been popping out a little.
I'm at one thousandth of an inch off,
which which isn't horrible, but it can be improved.
You want to be at least you don't want
to be more than maybe three thousandths of an inch off.
So now I'm going to pull my pin in,
slide my gauge all the way back to the front of the saw again.
Then I'm going to lower my blade all the way down.
Pull my fence up to right above where
the blade was and then lock it in there.
I'm going to pull this all the way
to the front without coming out of the track.
Make sure it's still seated good.
Then I'm going to zero it out, pull the pin in,
slide it all the way to the other side
without going out of the miter slot.
So I know I got a glare on there.
I'm going to try to block the glare.
But so now you can see my fence is about the same.
It's about 11,000th of an inch.
Some woodworkers actually prefer a little toe out.
And I don't mean they're wearing flip-flops in the shop.
That's called hipster sawdust catchers.
What I'm talking about is where they
purposely set the back of their fence
just a few hairs away from the blade so that you have more of like a V.
But I mean, so ever so slightly.
And that kind of helps with kickback.
Now, I don't know if that's ever been tested and it actually works,
but I've seen a lot of woodworkers write about it
in forums and stuff like that.
That was my 10 tools for under $50.
But I got one more bonus tool for you guys.
Quabam! This Harbor Freight carpenter's vise
and it's portable too so you don't have to keep it
screwed to your bench all the time.
I got a plywood overhang on my bench
so I have a spot to put mine and what I like about it is I
don't have to leave it on my bench permanently mounted even
though it does have screw holes and
you can do that I like to be able to remove it
because sometimes I put stuff on my bench that's
bigger than that and this would be in the way.
Now when I bought mine they were $19.99 at Harbor
Freight but I looked them up today and they're up to $24 now.
One of the reasons I didn't put this
on the list is because I couldn't find anything like this on Amazon
so you have to go to Harbor
Harbor Freight to buy it.
Two, I thought everybody probably had one
of these already and I was just late to the
game.
But if you don't, man, this thing comes in handy for $20.
I can't tell you how much I use it now.
Even in this video, I think I used it twice.
Well, that's my list of 10 woodworking tools for just under 40 bucks.
Can you get by without any of these tools?
Of course you could.
I can make a quesadilla with just bread and cheese.
But would I want to?
And I know somebody's already in the comments,
you don't need a table saw gauge.
I can do the same thing with a rusty nail and a unicorn's horn.
But that's the thing.
Most of these tools are just stuff I use
to make my life easier in the workshop.
And I need all of them probably about as much
as my wife needs another pair of shoes.
Should I be saving for retirement instead?
Absolutely.
But hey, at least I could use all these tools
to build myself a retirement shack out in
the desert.
Until next time, get to building.