10 COOL WOODWORKING TOOLS AND ACCESSORIES, Angled Drill Guide Jig, Hand Saw, Dust Collector..

Amazing Tools & Technology Update
83 followers
3 Video Views·Feb 12, 2023
Number 1. Nitra 30, 45, and 90 degree angled drill guide jig for cable railing.
The Nitra cable railing drill guide jig dowel allows you to drill 30 degrees,
45 degrees, and 90 degrees angle holes for wooden stair railings and deck posts.
The angles are fixed with no deviations, and you can quickly drill accurate 30 degrees,
45 degrees, and 90 degrees angle holes with an impact drill in the posts and railings,
saving you time and effort in getting the work done quickly.
Number 2. Ruitel Japanese hand saw 6-inch double edge sided pull saw.
One side of Japanese hand saw is 17 TPI for cutting hardwood,
and the other side is 14 TPI for cutting softwood.
The hand saw has three-sided grinding gear design, sharp edge, faster chip removal,
and smoother cutting. Exquisite beechwood handle and slight curve design make the
saw handle comfortable to hold, and the operation is more labor-saving.
Straight shank double-sided small hand saw, small and light,
suitable for fine cutting and small parts production. It is the best choice for woodworking DIY.
Number 3. Adula's 35mm concealed door hinge jig.
Adjustable double clamping plate for accurate positioning, clamping 15-25mm thickness of wood
panels, convenient for fast multi-angle drilling and installation of cabinet door hinges.
Suitable for most 35mm cabinet hinge jig clamps, with an adjustable opening depth
of 10-15mm and adjustable drilling edge distance of 3-7mm. Upper, middle, and lower 3-bearing drill
sleeve, the total height of drill sleeve 2cm, the small swinging amplitude of drill bit for
accurate hole opening. Easy to use with any drill, you don't have to be a well-equipped
woodworker to install these hinges. Perfect for any handyman who needs hinges made.
Number 4. Round circle center finder compass tool.
The center finder compass can find the center point on irregular items with a diameter of
300mm or 11.8 inches for drawing circles, lathe work, and wood turners. The lathe center finder
is made of thick enough transparent acrylic with a central hole and clearly marked circles,
which allows you to see exactly what you are doing and helps you measure quickly and easily.
Thickened design of ruler body, durable, longer service life, the number scale is the radius,
laser scale, clear reading, not easy to stain, easy to operate.
Center finder for woodworking. Center finder tool works on wood, poster board, plastic, metal, glass,
composites, and more. Fits for woodturning, art, crafts, school projects, and finishing
woodworking. Easy to use, simply tap a small nail or pin through the center hole, insert a
pencil in your choice of diameter hole, and pivot around the center point to make your circle mark.
Number 5. Joris connectable profile gauge. You can splice the 5-inch and 10-inch profile gauges
by tightening four silver screws, for silver screws are located on the 5-inch profile gauge,
then you can have three sizes of profile gauges of 5-inch, 10-inch, and 15-inch,
which are suitable for more scenes. 5-inch is very suitable for some narrow spaces,
10-inch can measure most object contours, 15-inch can copy larger object contours,
and 5-inch and 10-inch can also be used together. Number 6. Recon M1 caliber measuring tool for
The M1 caliber is a fully integrated, patent-pending, measuring tool that clamps to
almost any kind of soft fence and outputs measurements of materials slid underneath
its wheel on a large, backlit LCD screen. Using modern technology with a focus on functionality,
measure and cut stock materials up to three times faster than conventional methods and
The M1 caliber eliminates the need for a tape measure and pencil, displays both English and
metric measurements, and is compatible with most miter, cut-off, chop, and vertical band saws.
Make miter, bevel, compound, and straight cuts on a variety of materials ranging from boards
to composites to pipe. Whether cutting dimensional lumber to frame out a home,
cutting composite planks for decking, or putting the finished touches on an interior job,
the M1 centralizes measurement-related activity to a single location.
Quick and easy setup clamp to your soft fence, release the arm, input your blade thickness,
and begin to cut. Perfect for professionals, contractors, woodworkers, and other tradespeople.
The M1 will provide the most accurate read on smooth materials.
Number 7. Mowark 26-Feet Measuring Tape. This portable, flexible, retractable decimal
measuring tape ruler, 8m long, 25mm wide, 0.15mm thick tape measure, is impact-resistant,
rust-proof, chemical odor-free, and can horizontally stand out till 7 feet and
vertically till 13 feet, without the tape collapsing or snapping. This easy-to-read
double-sided electrician ruler metal measure tape with fraction can stick to any ferrous material
with the powerful magnet tip, which greatly enhances the stability of the blade, especially
when measuring a really long distance. The magnets are also strong enough to double the tape as a
magnetic pickup tool. These make it a perfect tool for engineer, architect, etc. Measurement
uncertainty is strictly controlled within ±0.2mm, and the separate magnetic claw can move back
itself to deduct its own thickness when conducting inside measurement. The soft rubberized cover and
its contoured shape make this tool the best fit in your hand, securely and comfortably,
Work Grippers. A handy tool for the worktable that provides an elevated and level non-slip
surface for woodworking, sanding, routing, assembly, carving, painting, supporting,
leveling and more, durable high-friction gripping surface securely holds projects and objects in
place and is non-marring to safely protect both the workpiece and work surface from damage.
Built solid, each surface-protecting gripper can support 1,000 pounds and works great on the floor
as a non-skid support for heavy furniture, appliances, shelving, machinery, and other
heavy objects. A perfect addition to the toolbox, workbench, workshop, craft room, or hobby table,
these universal grippers work similar to a bench vise slash clamps and are like having an extra
angled holes in 15-degree increments, up to 90 degrees horizontal. Holds rotary tool at 90 degrees
horizontal for tasks such as polishing metal objects, sanding different shapes and grinding
metal piece. Drill depth 2 inches. Allows telescopic adjustment to any height between 16
and 29 inches. Crow's Nest provides onboard storage for drill bits, wrenches, and other
Dremel accessories. Cord management clips for safe storage of power cords. Inch and metric marking
on base for accurate drilling of workpiece. Depth markings with depth stop for consistent depth.
Sturdy metal base with four clamping points to securely hold the station.
Number 10. Mullet High-Speed Cyclone Dust Collector. Parabolic design and seamless
one-piece construction create a faster airstream, more suction power and better capture efficiency
than ordinary straight-wall cyclone and bucket assemblies. Eliminates the Frankenstein-like
assembly of bolts, bungees, and duct tape of other systems creating a unified, airtight connection
and a vac filter that stays cleaner longer. Included hose adapters allow for easy connection
to virtually all wet dry shop vacuums, dust extractors, and their hoses. Red, orange,
yellow, or green, tall, short, big, or small, mullet is made to fit them all.
