還是帝政裙的製作暨聽不懂的嘮嗑
15 次觀看·2024年12月4日
Hello everyone and welcome to a new year and a new video, which is actually part of a new series.
This series will consist of me making garments inspired by some of my favorite TV shows,
or in some cases, even doing my best to reproduce specific garments from said TV shows.
There are a lot of good shows out there and I had a lot on my inspiration list,
but I decided that I would start with Bridgerton.
If you're watching a historical sewing channel,
then there's a good chance you've already heard about this show,
because I feel like it caused quite an uproar in the costuming community,
mainly because most people hated the costuming.
And I had some issues with it too,
but for the most part I liked the historical silhouettes paired with modern fabrics and fantastical flourishes.
And though I liked a lot of the individual garments,
it was more the overall feeling that the costuming had that I was eager to recreate,
or to try and recreate.
So instead of focusing on a specific garment,
I chose to raid my stash for fabrics that felt similar to the textiles I used.
And I came up with a green silk, a floral netting,
pink beaded lace that looked very Bridgerton to me.
So I used them to make a pretty little regency dress,
and now I'll show you how I did it.
The main fabric I'm using for this is a green silk,
and I had very limited quantities of it,
like less than 4 yards.
So I decided to focus on cutting the bodice pieces out first,
then whatever was left could be used for the skirt.
And since one edge was already cut on an angle,
I opted to first cut the bias cut strips that will be used for piping around the bodice.
Then I pinned my bodice and sleeve lining pattern to the silk and cut those out as well.
And a printable PDF copy of this pattern is available for everyone
at the $6 up tier on my Patreon,
if you're interested in making something similar for yourself.
This pattern was drafted for a project I made a couple years ago,
and never really posted about.
But I altered it to fit more closely below the busk using darts,
and to have poofier sleeves.
Which reminds me,
sleeves were one of my big qualms with Bridgerton costuming.
There was this weird preference for flutter sleeves,
especially on Daphne's dresses.
I just don't understand it
when puff sleeves are one of the only good things about Regency fashion.
However, enough dresses did have appropriately puffy sleeves
that I still felt I could include them in my inspired design.
So I did,
because they are obviously superior.
Anyway, once the bodice was cut from silk,
I was ready to cut the overlay.
And the overlay consists of two layers,
er, three layers.
Two layers of peach tulle,
and one layer of embroidered floral mesh.
The overlay is cut using the same bodice pattern,
but the sleeves are cut to be 2.5 inches longer.
The overlay will be gathered to match the length of the silk lining.
And the bodice pattern is cut out once again,
this time from a lightweight cotton that will serve as lining.
As we've already established,
the bodice is shaped below the bust with two darts,
and above the bust with gathers.
The gathering points were marked on the pattern,
and transferred to the fabric by notching the material at the markings.
The darts, however, are marked on the lining using pencil.
Instead of marking the sewing points of the darts,
I just marked the center point,
or the fold point of them.
This way there is less to transfer to the fabric.
With that done, the lining was set aside,
and I switched my focus to stacking the many other bodice layers I had cut out.
Each silk piece is tied to two layers of tulle,
and one layer of embroidered mesh.
The edges are aligned,
then the layers are pinned together.
And this was repeated for every single piece.
The pins holding all the layers together were just temporary,
and so is this next method.
But it's a less scabby temporary way of keeping them together.
Also known as basting.
And this is my favorite basting thread,
since it is pre-waxed and pre-cut,
it speeds the process up a lot.
I generally use 1-inch long stitches near the edges of the pieces,
because I'm lazy,
and if they are sewn into the seams,
then you don't necessarily need to remove them later.
However, I do like using contrasting thread,
because that makes it easier to find them later
if I do need to remove them.
It's the same reason I use ball head pins,
otherwise they would probably live in my garments forever
until someone else pointed them out.
Now I'm gathering the top edge of the front bodice panel.
There are two separate points where it is gathered,
one over each breast.
It doesn't have to be gathered at the center,
because there is no volume there
that needs additional fabric to cover.
And I'm gathering this by hand,
since that gives me more control,
using two lines of running stitches,
sewn a quarter inch apart.
After the fabric is gathered to the right length,
and the thread is tied off,
the gathers can be arranged until they look even.
And off camera,
I repeated this process at these same points
on the lining layer.
Now the straps can be pinned to the front panel.
I did this with the silk bodice pieces,
and repeated the process with the cotton lining pieces.
And I also pinned the back panels
to the other end of the straps.
These were sewn by machine
with a normal half inch allowance.
Then the seam allowance was pressed open.
The next step in making the bodice
was going to be adding piping.
And to do that,
I first had to make the piping.
So that's what I'm doing here.
Well,sort of.
In this footage,
I'm just sewing bias cut strips together
to form one very long bias cut strip.
The seam allowance was trimmed
and pressed off camera.
Then I was back at the sewing machine,
and after a quick switch to a zipper foot,
I was ready to actually make the piping.
This is done by folding the bias strip
over a piece of cording or rope.
So the raw edges are even,
and the cord is encased in the fold of the fabric.
Sew as close to the cord as you can,
and try not to stretch the fabric as you sew,
because then it will cause rippling.
That's pretty much it.
I aligned the raw edge of the piping
with the neckline of the bodice,
then sewed the piping on
using the same zipper foot,
which allows me to get right up against the cording.
After sewing it on,
the piping tape and raw edges are tucked inward,
so all you see is a neat line of piping
around the now finished neckline of the bodice.
Well, half finished.
To finish it off properly,
I'm turning that edge of my lining inward
by a half inch using an iron.
Then I'm pinning the lining
so the edges are all even,
and the folded edge sits just inside
the neckline of the silk layer,
neatly covering all the raw edges
and the ugly piping tape.
The lining is basted to all edges
of the silk pieces,
except around the neckline.
That edge is carefully slip stitched to the piping.
And here you can see that my piping
is sort of wrinkled.
I had some rippling issues with it,
even though I didn't stretch the fabric
as I sewed.
I'm not sure if it was a tension issue
or because the fabric wasn't cut
on enough of an angle,
but something was definitely wrong with it.
If I had more fabric,
I probably would have reattempted it,
but I didn't,
so I didn't.
Now even though the edges are secured together,
I'm going a step further
in basting the lining and silk layers together
across the dart marking.
I really don't want the material
to separate at this point,
because I could end up not catching
the outer fabric when I try to sew the darts,
and then it would look really bad.
And I generally try to avoid
things looking really bad.
After that is done,
the fabric can be folded
on the dart markings and pinned.
By machine,
I'm sewing a third of an inch
away from this line at the bottom,
and tapering off to nothing
at the point of the dart.
This is pretty common
in vintage pattern instructions,
so I'm familiar with this process,
but you could draw the stitch line
if that makes you more comfortable.
Personally,
I'm just using the markings
on my sewing machine plate
as a guide for accuracy,
but even without that,
I've sewn enough darts
that I think I could do this by eye.
The darts were all pressed,
and now it's time for the fun stuff.
The stuff that doesn't require
fittings and measurements.
We are entering the wonderful world
of embellishments.
Which for this project
will mainly consist of lace appliques
fussy cut from this beautiful lace fabric.
I only had a yard of this,
but that was plenty for a project like this.
You'll see how I stretch it out
for the skirt later on,
but for this part of the project,
I only needed enough appliques
to go around the perimeter of the neckline.
And once I had enough of them fussy cut out,
I switched to fussing with their placement.
I tried to position them somewhat symmetrically
with the lowest point in flower
at the very center of the garment.
The edges of the appliques
were tacked down using running stitches.
These are smaller
than traditional basting stitches,
and they aren't temporary.
But they aren't particularly durable either,
and they really don't need to be,
because the appliques
will be more thoroughly held down
by the hundreds of sequins
I sew on in the next step.
Speaking of that next step,
did someone say hundreds of sequins?
These 7mm cuffed iridescent sequins
were so perfect for this project.
They added sparkle
but without too much pigment,
and really brought the appliques to life
by adding more dimension.
They also helped fill in any gaps
between the appliques,
making them look denser and more expensive.
Plus they were fun to sew on.
I love sewing on sequins.
I just love sequins in general.
When that was done,
these side seams could finally be pinned and sewn.
I didn't document it,
but after sewing and pressing these seams,
I trimmed the allowance down with pinking shears,
and whip stitched it to the lining,
making it less prone to fraying in the future.
Or that is my hope.
Now the bodice looks like a bodice,
or at least some type of fancy bra.
Regardless of what it looks like,
it now needed sleeves.
The sleeves have a silk lining
and a slightly longer tulle and mesh overlay.
I lined the top edges of the overlay
and the lining first,
and pinned them together.
Then I pinned the bottom edges,
and the excess fabric was arranged evenly
and pinned down at what will be the side seams.
Off camera I swapped these pins out
for basting stitches,
but I didn't want to film that part
since you saw the process earlier
with the bodice.
And no spoilers,
but you might see it again when making the skirt.
Then I marked points every 6 inches
along the bottom edge of the sleeve.
The overlay will be gathered vertically
1 inch above the hem at these points,
until the overlay matches the length of the lining.
This is sort of hard to explain,
but it's really easy to do.
I'm just gathering up from the point I marked,
pulling the thread taut,
then gathering back down
to the point where I started,
then tying the thread off.
I pinned a single flower applique
to cover each point
where the sleeves were gathered.
These were hand-sewn on,
then embellished with sequins
to match the details around the neck.
Here's what they look like finished.
This was an easy way
to make the sleeves look more elaborate
without fussing too much with the pattern,
which is good because
sleeves can be sneaky
and you don't want to mess with them
just in general.
At this point,
the backside of the sleeves
looked a little rough from all the handwork,
so I decided to line them,
and here I'm basting it in place.
But that's enough of that.
I shall save your eyes
and my editing fingers
from all the repetition.
With all the layers secured together,
I could move on to gathering
the bottom edge of the sleeve down.
I did this with two lines of running stitches,
pulled taut until the bottom edge
measured 15 inches long,
and that includes
one inch of seam allowance
at each side.
I'm using the same method
to gather the top edge down
to 14 inches
between the two points
marked on the pattern.
My gathered sleeves
were taken to the sewing machine
and trimmed with piping.
And this, my friends,
is why you should lock
the camera's focus
before filming anything,
otherwise your camera decides
the Singer logo
is what really needs
attention brought to it.
Like how sponsored by Singer
does this footage look?
Sadly, it is not,
unless my camera knows something I don't.
But all of my sewing machines
are by Singer,
so if they want to reach out to me,
that would be great.
Anyway,
in this unfortunately blurry clip,
I'm sewing piping
onto the bottom edges of the sleeves
to form a cuff of sorts.
The piping tape and raw edges
were covered with cotton tape,
which was topstitched atop them
and turned inward.
I whipstitched the other edge
of the tape down
so it neatly sits inside the sleeve.
Then I pinned the sleeves
with the right sides facing each other
and the sides being aligned.
These were sewn at the one-inch allowance.
The excess allowance
was trimmed away
using pinking shears
and whipstitched
to the lining by hand,
much like I did
and neglected to film
with the bodice earlier on.
This finished the sleeves,
so the last step
was just sewing them on,
and they were sewn on
with the half-inch allowance.
Then I sewed another line of stitching
a quarter inch away
from the first
and trimmed the seam allowance
to the second line of stitching
using pinking shears.
This helps prevent fraying
and is a pretty common method
of finishing arm openings
in commercial patterns.
It might not be
historically accurate,
but it works,
which I feel like
they probably said a lot
when making the Bridgerton costumes.
With the sleeves on,
I went ahead and added
additional appliques
around the neckline
and on the straps.
If I sewed these on earlier,
they would have interfered
with the seam allowance
required for attaching the sleeves.
And now it was time for the skirt.
The skirt consists of three rectangles
and two gourd panels,
one on each side.
I cut out the front panel first,
since it is the most important one.
Then I cut out the gourd side panels
and lastly the two
rectangular back panels.
These had to be cut
slightly narrower than the pattern
due to fabric limitations,
but it still turned out okay.
Like the bodice,
these pieces will have an overlay
basted atop them.
Except this time,
that overlay only consists
of two pieces of tulle.
The mesh overlay
will be cut separately
and attached later on.
In the meantime,
I'm laying the tulle over the skirt pieces,
pinning them together,
and roughly cutting it
to the right size.
The tulle will be trimmed later on,
so I didn't bother
making it too precise.
And as I hinted at earlier,
here is more riveting basting footage
for you of me basting
the tulle to the silk pieces.
Now assembly could begin,
and the skirt pieces
will be sewn together
using French seams.
This first requires them
to be sewn together
with a half-inch allowance
of the wrong sides facing each other.
The seam allowance is trimmed
to under a quarter inch.
Then the seam is pressed,
folded,
and repinned
with the right sides
of the fabric facing each other.
It's then sewn once again
with a half-inch allowance,
neatly encasing
the raw edges within.
I didn't film every part
of this process,
but if you've seen
literally any of my other videos,
then you've seen it
step by step before.
Rarely a project passes
without some component
requiring French seams.
At least that seems
to be the case with my projects.
Also, because of all the trimming
involved in this assembly process,
I really wasn't concerned
about the tulle
perfectly aligning
with the edges of the silk,
which is why I didn't
trim it too precisely earlier on.
After the skirt was
seamed together
and the seams had been pressed,
I pressed the hem inward
by approximately a half-inch.
Then I marked a line
two inches away
from the bottom edge,
and turned it up
to meet that line,
resulting in a one-inch hem.
The hem was stitched in place
using whip stitches,
but I left the last
five inches or so
on each side unsewn,
for reasons I'll go into later.
Because whip stitches
only catch a few threads
at the outer layer of fabric,
these stitches should be
almost invisible
from the exterior of the garment,
and they will be
even less noticeable
after good ironing.
Now onto the mesh overlay.
I cut this from
the same skirt pattern,
but added about six inches
of length to these pieces.
That's because,
like with the sleeves,
this layer will be gathered
to create a ruched detail
near the hem.
These pieces were
seamed together
with one-inch allowances,
with the right sides
facing each other.
After pressing the seams,
I trimmed them down
to about a quarter inch
using pinking shears.
The mesh doesn't really fray,
and the smaller
the seam allowance,
the less noticeable they are.
I just didn't want to make
the seam allowance so small
that the stitches would rip out
if tension was put on it.
I wanted to incorporate
the lace fabric
into the skirt too,
but I thought applique
strewn around the hem
might look too messy,
and also puny
given the length of the skirt.
So I decided to make
my own more intentional
looking lace trim,
which means I'll be showing you
how I turned this fabric
into this scallop trim.
I started with
a self-drafted scallop pattern.
This was pinned to tulle,
then I traced it
half inch away from its edges.
I didn't want to trace
too closely to it,
as the markings
might be visible
on the finished trim.
This was close enough
to serve as a guide,
but not so close
to get in the way.
Then I cut the lace fabric
into smaller pieces,
isolating the flowers and leaves
and making them
more applique-sized.
I cut between
the natural gaps in the lace
to try and avoid
any fraying of the embroidery
or loss of the embellishments.
And I wanted to make
at least three yards of trim,
so there were quite a few
of these needed.
Though I still have
tons of this fabric left,
a little really does go
a long way with
these beaded laces,
which is good,
because they are
super pricey per yard.
I pinned the appliques
to the high points
of the scallops first,
then filled in the space
between each one.
I made sure to keep
all the appliques
inside the outline
with some room to spare.
I didn't have the appliques
to be a perfect scallop shape.
I like that they have
some natural variance to them.
But I did try and arrange them
to form nicely to my desired shape,
so it looked relatively even
and intentional.
Off camera,
I basted all of them to the tool.
After they were attached
to the tool,
I trimmed away
excess tool from the edges,
leaving behind
just the lace appliques
and the tiny bit of tool
they were attached to.
Also,
it's way easier
to sew them on
before you trim away
the excess tool,
since it gives you
more to hold onto
and also stabilizes it
and makes it less likely
to warp as you sew.
I made three 50-inch lengths
of this trim,
which was plenty
to trim the mesh overlay,
which is what I'm doing here.
I lined the bottom arch
of the scallops up
with the bottom edge
of the overlay,
then pinned outward
from those points.
When I reached the end
of the overlay,
I actually cut the trim
to sit a couple inches away
from the seam allowance
at what will be
the center back seam.
This way it won't interfere
when actually sewing that seam.
Speaking of sewing,
the top edge of the trim
was stitched onto the overlay.
Once again,
I used small,
not quite basting stitches,
but not super sturdy stitches either
because,
like all the other bits of lace
on this costume,
it will be secured further
by the use of sequins.
When securing the trim,
I specified that
only the top edge
was sewn to the overlay.
That's so I can lift the trim
and cut the overlay
to sit slightly underneath it.
So now the bottom edge
of the overlay is cut
to the same scallop design
and fully trimmed
with the homemade trim.
Now it was time for the sequins.
I added these
to the bottom edge first
to attach the bottom of the trim
to the remaining mesh beneath it.
Then I went back
through and outlined
the top of the trim
with sequins too
because you can never
have too many sequins.
If there are any gaps in the trim,
I filled those in
with sequins too.
I wish they could fill
in the gaps of my heart,
but as delightful sequins are,
they do not yet have that power.
And if you were wondering,
embellishing the trim at the hem
took about six episodes
of Canada's Drag Race,
which is a totally valid
measurement of time.
And what a worthy
six hours it was.
Look at how lovely it looks.
I love how it catches the light.
It's hypnotizing.
Or it is if you're easily
distracted by shiny things
like I am.
Now you might recall
that I cut the overlay
to be six inches longer
than the skirt itself.
So though the hem
looked pretty,
it was way too long.
But that was part of my plan.
I gathered the eight inches
above the high point
of each scallop
down to about one inch
using two rows
of running stitches pulled taut.
The thread was tied off,
but I left the tails long.
I used the length of thread
left behind
to embellish
these ruched points.
I thought about using
more floral appliques,
but decided to use
some green beads
and fake pearls instead.
And I liked how
these green beads
looked on this project so much
that I sewed a line of them
around the neckline, too.
That was all done off camera.
However, on camera,
I sewed up the back seam
of the overlay
and the back seam
of the silk skirt.
I used the same method
as earlier.
The overlay was sewn
with the one-inch allowance
that was trimmed down,
and the silk was sewn
with the half-inch French seam.
The only difference
is that I left
the top eight or so inches
of both seams open
to create an opening
to get the skirt on and off.
After these were pressed,
I went through
and filled in the gap
in the scallop trim
that resulted from me
not sewing it past
the seam allowance.
Doing this after sewing the seam
allows me to make
the trim look continuous,
since it goes over the seam
as opposed to being part of it
and having a visible line in it.
That's why I left
a portion of the hem
unfinished, too.
After the back seam
was sewn up,
I pinned the remainder
of the hem
and whipstitched it down
once again.
This way,
it looks continuous
and just tidier in general.
Now for the opening.
The seam allowance
left open
and the silk
was turned outward and pressed.
Then it was trimmed
using pinking shears.
The seam allowance
on the overlay
was pressed inward.
Then the overlay
was positioned
atop the skirt.
The top edges
were aligned
as well as the openings
in the back seam.
They were pinned together
at both of these points.
I slipstitched
the layers together
at the back seam opening
and basted them together
across the top edge.
Then the tops
of the side back
and back panels
were gathered down
using two rows
of running stitches.
I used two rows
because it makes
the fabric a bit more orderly
and less prone to flaring up
and interfering
in the seam allowance
when attempting to sew it on
because you don't have
a single point
where the fabric is gathered
that you're trying to
seam the bodice to.
Instead
you have a half inch
wide target
to sew across
between the two rows
of gathering stitches.
I don't know
if that makes sense
but if you sew
and you try it
I promise you'll notice
the difference.
After it was gathered
to the right length
the thread was tied off
and clipped.
The top edge
of the skirt
was aligned
with the bottom edge
of the bodice
then they were sewn
together
with a half inch allowance.
Much like
with the sleeves
I sewed another row
of stitching
a quarter inch
below the first
then clipped
the seam allowance
to that point.
This isn't
the prettiest
finishing method
in the world
but it is
pretty effective.
The fabric generally
doesn't fray past
the second line
of stitching
and it doesn't add
bulk in the way
binding does.
The back edges
of the bodice
were turned inward
to be level
with the opening
of the skirt
and sewn down
using whip stitches.
And for closures
I used hooks and bars
but I hate that part
and I hate
filming that part
even more.
So I didn't.
Last minute
I also went ahead
and made a sash
which is just
a rectangle
sewn into a tube
and turned
right side outward.
That was sewn on
and that finished
off the dress.
Here it is
in all its finished glory.
I actually really like
how it turned out.
Light green and coral
aren't two colours
I gravitate towards
nor are they colours
I would typically
pair together
but I think
it sort of works
or at least
it works better
than I initially expected.
My favourite part
are the details
like the splashes
of pink lace
outlined with sequins.
I think they are
what makes
this dress special
and they are
my favourite parts
to work on, too.
The only downside
I can think of
is that this dress
looks absolutely
terrible on me.
I have a large rib cage
so anything
that cinches in
at that point
and hangs free below it
looks like
a maternity gown.
It's why
I don't generally care
for Regency fashion
at least on me personally.
But on the bright side
I do think
it looks like
a very pretty maternity gown.
I guess now
is as good of time
as any
to share my thoughts
on the show
in case anyone even cares.
I liked it.
It was one of those shows
where I didn't really like
the characters
but I enjoyed watching it
and was eager
to keep watching it.
I feel like the world
they created
was a bit flawed
and predictable
and it definitely
had some issues
that I won't go into
but as a whole
I liked it
and I liked
the sparkly ridiculousness
of the costumes, too.
It was fun
trying to spot
all the lace fabrics
I've seen
and honestly
almost purchased
in the garment district.
My biggest issue
with the costumes
were the accessories
specifically the jewelry
that you can literally
buy on Amazon
for $10.
I've gotten ads for them.
If this was a prime original
I would have thought
it was intentional
product placement.
And since a lot of times
those pieces
were front and center
it was distracting to me.
I didn't want to mar my dress
with any hideous jewelry
but I did buy
the cheapest satin gloves
I could
to complete
that Bridgerton look.
But if you can look past
the crappy accessories
and the insensitive
stereotypes
it's a fun romp.
I would give it
7.5 unicorns out of 10.
That is my official
show ranking method.
And that is all
I have to say
about this project.
I hope you enjoyed
seeing me create it
and that you like
the finished result.
I'm not sure what show
I'll be taking
inspiration from next
but if you'd like
to see more videos
like this
then you should
definitely subscribe.
And if you enjoyed this one
giving it a like
and a comment
really helps me out.
Thanks so much for watching
and I shall talk to
all of you very soon.
