彩鉛肖像畫技巧……如何畫出逼真的鬍鬚

書道雅集
10粉絲
11 次觀看·2024年9月9日
Pastel Portrait Tips... How to PaintDraw a Realistic Beard... Narrated video with real-time footage.
Hi there, thank you so much for clicking the thumbnail and being interested in my work.
In this video, I share with you my techniques and tips on how I create a beard using pastel pencils.
So be sure to watch it right through to the end because here and there I'll be slowing things down in real time,
so you can take a closer look.
So let's dive in and take a look.
Right, so it's just this little study.
This is a 6 inch by 4 inch.
I'm just putting a centre point in there like I normally do because I'm doing this freehand.
Now I do freehand is from that centre point, I just imagine the angles.
And because I've scaled the image to the same size 6 by 4,
I'm using the sides and the top and bottom to give an idea of where the actual shapes lie.
So I get the big shapes in first.
Then focus on angles and also measurements comparing one area against another.
So once you've started to draw an area in,
then you've got a shape to actually compare the other shapes with.
Also use the pencil on a vertical plane and a horizontal plane to see how one point and another point lines up.
Right, I'm just going to start to speed this up now.
But if you want a more in-depth look at how I do the outline freehand and other methods as well,
please check out the list of videos in my channel in the description below.
Here's the colours I'll be using for the underdrawing.
First of all I just rubbed out there with the kneadable eraser which is Faber-Castell brand.
Just to ghost the outline a little bit.
I'm going to keep this at a fast pace with the underdrawing
because I want to spend most of the time in real time
showing you how I've done the details and the rich colours.
So basically what I'm doing here is just finding the shapes.
All the idea for the underdrawing is to correct the outline
and to just make sure the shapes are in the right places.
Now I'm making my own black here by using dark green and a cold red.
Now to get a black or a real dark tone of a colour is always use the complementary colour.
So to de-saturate a red, use a green.
To de-saturate orange, use blue.
To de-saturate a yellow, use a purple.
So with this being flesh colour, mostly pinky colour,
I'm using green to actually de-saturate it.
So because sometimes when you put the colours down,
they're too rich and glowy too much.
So to de-saturate that, just add the complementary colour which is green.
And then just keep adjusting.
But like I say, this underdrawing is just basically
just getting the shapes in the correct place,
redrawing it, getting a feel for the actual picture.
But it's really enjoyable because you can be loose and free with it.
And each stage I do, because the next stage is going over this with the rich colours,
that's also a free and alive state.
It's not too detailed.
The details come right at the end on the last stage.
So basically just getting a feel, getting the energy.
Even though you're drawing lips and the beard and everything here,
there's energy within that, coming through the beard of that person.
Because if it was a commission, you'd want it obviously to make it look like the person you're drawing.
So really switch on to the energy always, no matter what stage you're doing.
What I tend to do is just let go of details by opening the heart,
let go of the mind, and just switch on to awareness rather than thinking about it.
Because to think about something, you can only think about one thing at a time.
But to be aware, you can be aware of everything.
So being aware actually spreads the vision.
So you see the whole.
Great combination for the darkness of the beard is the burnt umber and warm blue.
And also yellow ochre as well, mixing in with the combination.
Really creates nice subtle colours.
Because it's daylight, because it's outside, this photograph was taken,
it's really fresh combination.
Just using those colours to create the greys within the beard.
When you're doing these loose under drawings,
you see how far I'm away from the pencil tip.
Just keep your fingers quite away from the actual tip of the pencil.
It keeps everything nice and loose.
And you can just put a nice layer on top of the pastel mat.
Because you don't want to put too much pigment down.
It's got to be light and keep some tooth there.
So when we start putting the details in and the actual rich colours,
which is the next stage,
there's something for that colour to sort of grab onto.
So never over really load your pastel mat on this sort of under drawing.
Just keep it nice and light and loose.
It's just basically drawing the areas, like I said, just blocking in the shapes.
If you're enjoying this video, why not subscribe?
It's absolutely free.
And then you're sure not to miss any of my future videos.
Now because this is a video regarding the beard,
I don't want to go too much depth on how I've done the skin tone.
But if you look into my channel,
I've got a massive amount of videos now in there,
talking about in depth how I approach, how I do the skin tone.
So be sure to check those out at the end.
Just showing a bit of real time here.
Just showing you how I'm mapping the actual beard out.
It's just a case of using your white.
It's a Carbothello white.
And just putting a few sort of marks here and there.
Just measuring it against the vertical plane,
against the side of the nostril or the nose or wherever,
just to see where it lies.
And then just be free with it.
You don't have to be exactly in the right place.
But if you can keep the pattern similar,
that will actually create less tension.
Because if you just put random marks in there,
you'll lose your way.
And then you'll get all stressed out,
wondering what sort of subtleties to put in.
But if you keep a similar pattern,
don't have to be exact.
Because I like to keep things loose anyway.
So I'm not trying to...
It's not hyper-realistic.
It's more...
It's realistic, but it's not hyper-realistic.
I'm not trying to draw everything exactly like the reference image.
It's just my interpretation.
So just be free with it and just enjoy relaxation.
And just flow.
And just keep using angles
and just marking where you think they'll be.
And then more of this will be glazed over later on
when we start putting the rich colours in.
But it just maps everything out.
If you're enjoying this video,
why not give it a like and share it with your friends?
It would mean so much to me,
as this would help the channel to grow.
Here's the Caran d'Ache pencils I've chosen
for the rich colour stage.
Here's the numbers.
I will add to them as I progress,
but I will show you those additional pencils
as we go along.
So when I do a portrait,
it tends to be three stages.
It's the outline and underdrawing
I treat as one stage.
Then the actual rich colours,
which this one is now,
which is focusing on
trying to create the correct chroma
and the value.
And then the last stage will be the details.
Here's an additional couple of pencils
I'm using from the Caran d'Ache.
With this stage,
it's still like a blocking stage.
We're still mapping it out.
But I'm focusing now on
trying to get that chroma right
and also the values.
So that's what I'm concerned with.
I'm still not concerned with too much detail.
So it keeps it loose, you see.
If you just see it as light and shade
and feeling,
it just keeps that nude sort of fresh and alive.
Just showing a little bit of real time now again.
Just showing you how I'm using the dark green
and the warm red in this instance.
So I'm changing it up.
I'm only very, very lightly putting this on.
It's like a little glaze.
You're putting over a colour
you've already put there.
But it's just subtly changing
the actual feeling of that shadow.
Like I said earlier,
I don't want to spend too much time
explaining how I do skin tones.
It's more about how I'm doing
the moustache and the beard.
So if you want to check out again
the actual videos in my channel,
I've got loads in there on skin tones.
So please be sure to check those out.
So what I'm doing here
is just planning everything again.
But I'm just being more aware now
of trying to get the values
and the chroma right.
Now the chroma is how it shines,
how it glows.
See, a lot of people
tend to just look at the values.
But to create realism,
I feel that if the chroma's right
and the value's right,
it doesn't matter how loose you are,
it's still going to look realistic.
So you can be as loose as you want to be,
or as detailed as you want to be.
But if you get those two aspects right,
the chroma and the values,
you're sure to actually get
a realistic look to it.
Just a bit of real time,
just showing you how
I'm mapping it out now
with the Carbothello White,
and then just glaze over
with the Yellow Ochre
to create that sort of glint to it,
because the white will shine
through the colour
what you're glazing over the top.
And that's how I try and get
that chroma right
within the beard as well,
because it's very difficult
to find a colour
that's going to create that glow.
I've found anyway,
without just doing the white first
and then glazing over the top,
it just seems to just give
that extra sort of zing to it.
I will be putting
a little bit of Lemon Yellow
in with that eventually,
when I start putting the details in.
But at the moment,
all I'm doing is
just getting that sort of feel for it,
and just focusing,
like I say, on them two aspects.
So what I'm going to do now
is speed through now,
because that's similar
to what I'm doing
right through with the beard,
but I'm going to speed through now
until we get to the detail stage,
and I'll just show you
how I approach that.
I'd just like to take this opportunity
to thank all my Patreons
for their wonderful support
every month with pledging.
I really appreciate it.
I can't thank you enough.
It does make a massive difference.
If you're considering
joining me on Patreon,
and would like to have the benefit
of longer, slower,
and more in-depth videos,
please check the link
in the description below
for more details.
Slowing it down again to real time,
just to show you
how I'm using the black,
because sometimes
you can't get the depth of shadow
you want by using
the complementary colour,
and also brown and blue,
you're very limited to how dark
you can get it with pastels,
if you were mixing that
in oil paint,
you can get it really dark,
really brown and blue,
and make really lovely blacks.
But with pastels,
you've got to add that black.
Now the Carbothello black
is a magic.
It's actually,
it's like a natural shadow,
so I really recommend
getting one of them.
Now I've just glazed over now
with that warm blue,
which is creating
that reflected light from the sky,
and because this is outside,
so you're getting that feeling
of daylight,
natural light on it,
so that sort of combination,
like I said earlier,
is really good.
So when you use a black,
always mix a colour with it,
because black on its own
can look a bit dead,
so always try and glaze
something with it,
no matter what colour,
but if you try and add
something with it,
it just makes a difference.
If you'd like to give a donation,
please find a link in my heading
on my channel page.
I'd really appreciate any donation,
no matter how small it is.
It really does help
to finance these videos.
Now you can see me mapping it out
now with the white,
and then just going over areas
with the black and brown
and sometimes blue.
Now the thing to look for really
is to get the darkest dark
in the same place,
around,
so you're comparing
one darkness against
the other darkness,
just making sure
that you get a balance of values.
So it's a really good idea
to do that.
Right,
slowing it right down now
to real time,
so you can see how
I'm putting this black in.
So what I'm doing
is really letting go
and just sense
what needs to be done.
Let the details just happen.
So what I'm tending to do
is just focusing on
opening my heart,
letting go of the mind,
being aware rather than thinking,
and just let the hand
move where it needs to go,
just be free with it
and spontaneous.
I'm varying the pressure
of the white here,
the carbophyll white,
very light pressure
to create greys,
and then if I need
to make a glowy part,
I'll press on a little bit harder
then glaze over the top.
So that's what I'm doing
with the white.
With the dark,
I'm doing the same there.
It's light pressure
for greyer areas,
pressing on harder
for darker areas,
and then I mix
or glaze something
with the black.
So that's how
I'm sort of getting
that sort of body
to the actual beard,
is to create
all these subtle glazes
over top of this foundation
with the white and the black.
Now before I can move on
to all this stubby area
of the beard,
I need to get
the flesh colours right,
so I'm just roughing that in,
so just very, very loose,
using the carbophyllo
and caran d'ache pencils together
to get that richness
and subtleties.
It's a case of just
keep playing with the red
and the green
and the actual yellow ochre
combinations of those
to get the correct skin tones.
I'm slowing it right down now
so you can see
how I get the details
in this stubby area,
just using the brown
over the green.
So what I did first,
I used a dark green
just to get an idea
of where that beard stubble would be
that was early on
in the underdrawing.
I didn't quite get to show you that.
The reason being
because you can change that green
up into skin tone
if you need to.
So you're getting a pattern
underneath
that you can follow now
which I'm doing now.
So I'm following that
green I put in earlier
and I'm going over now
with the brown
and then what I'll do
is go over with the black
in certain areas
once I'm happy
with the brown looks.
But I can change that brown
into a grey if I want to
by adding blue to it
and white
and then I can make that
into a fleshed colour again
if I need to.
So if you ever make any mistakes
you can always rectify it
by making any colour
into a neutral colour
which is adding the
complementary to it.
But in this case
brown is great with blue
to create greys
when you're adding white with it.
So there's always a good idea
to do that sort of thing
just gets you out of quite a few
sort of problems
if you do get them.
So what I'm doing here
is highlighting the hairs
with the light flesh 5% tint
of the Caran d'Ache range.
Even though it's a flesh tint
it's really good for these glints.
So I'm putting a little bit of that in
because it's really rich
and then I'll probably glaze
a little bit over the top of that as well.
So you're playing with white
and that colour
just to see what looks best.
So I'm glazing now
the flesh tone there
with a bit of green
just to get rid of that vividness
a little bit.
It's all about getting them values
and chroma
and sort of colour subtleties right.
And now I'm going over the black now
over them bits of brown
because I'm happy where they are.
So it's a case of building it up
as you go along really.
Now with final details
all you're doing
is just putting little glints
here and there
and then just glazing over
with lemon yellow
and burnt sienna
which creates a gold.
Hope you enjoyed this one.
Here's the finished study
at the correct angle
rather than being inspective on the easel
so you can see how it finished up.
If you're interested in more of my work
here's a few links
you might be interested in.
Take care.
