Кажется фантастикой, что русские изобретатели научились «читать» мысли людей, обогнав Илона Маска.
Или что они лидеры в производстве искусственного сапфира на планете, который стоит в том числе на Apple Watch.
А ещё они придумали лазерную технологию резки стекла, которую, опять-таки, используют при производстве айфонов.
Удивлены? И это только начало. Сейчас вы увидите не какие-то тайные закрывающие технологии - а современные разработки наших изобретателей и учёных, которые уже сейчас завоёвывают мировые рынки и идут в массовое производство.
Поехали.
Выращивание искусственного сапфира
Трудно поверить, но именно в Ставрополе – центре аграрного края, работает предприятие, которое является крупнейшим в мире производителем искусственных сапфиров. Это ставропольский «Монокристалл» – «дочка» многопрофильного холдинга «Энергомера». Здесь создается четверть мирового объёма синтетических сапфиров.
Именно на “Монокристалле” впервые в мире вырастили 300 килограммовый искусственный сапфир.
А вообще их начали выращивать давно, более ста лет назад, и использовали для швейцарских часов.
Первый сапфир вырастили именно в Швейцарии. С появлением электроники выяснилось, что искусственный сапфир – это уникальный материал, у него очень много применений. Определённые устройства на сапфире работают лучше, чем на кремнии. Например, сапфир быстрее проводит тепло. Он идеален для изготовления светодиодов.
Помните момент, когда вместо трех часов без подзарядки ноутбуки стали работать пять-шесть часов? Время работы аккумуляторов увеличилось за счет экономии на подсветке, ее заменили на светодиодную, изготовленную на основе сапфира. Потом светодиоды стали применяться и в телевизорах, благодаря этому появилась возможность делать их гораздо тоньше.
Ну а для потребителя самое понятное применение сапфира - в качестве экрана для смартфона или умных часов.
Резка стёкол для айфонов
Лазерное управляемое термо-раскалывание, или сокращённо ЛУТ - технология - была разработана Владимиром Кондратенко.
Наибольшее применение технология нашла в тайваньской FoxconnTechnologyGroup– основном производителе-сборщике Эппловских продуктов.
По традиционной технологии у стекла после вырезки шлифуют кромку и снимают фаску. Причем, отшлифована она должна быть до полуполировки; кромка должна блестеть. Испытания на прочность просты: экран кладется на две опоры, и сверху начинают давить. После механической резки под нагрузкой 8-10 кг стекло ломается. А после лазерной – стекло прогнулось, и только при 100 кг (!) рассыпалось на мелкие осколки, как закаленное.
А вот таких бюстов сделано только два в мире.
У русского изобретателя и у пр
It seems to be a fantasy that Russian inventors learned to read people's minds by overtaking Elon Musk.
Or that they are the leaders in the production of artificial sulfur on the planet, which is also on Apple Watch.
And they also came up with the laser cutting glass technology, which is again used in the production of iPhones.
Surprised? And this is just the beginning.
Now you will see not some mysterious closing technologies,
but the modern developments of our inventors and scientists, who are already conquering the world markets and go into mass production.
Let's go.
The cultivation of artificial sulfur.
It is hard to believe, but it is in Stavropol, the center of the agricultural region, that the enterprise that is the largest in the world in the production of artificial sulfurs works.
This is Stavropol Monocrystal, the daughter of the multi-profile holding Energomir.
Here a quarter of the world's volume of synthetic sulfurs is created.
It was on Monocrystal that the world's first 300-kilogram artificial sulfur was grown.
In general, they began to grow them a long time ago, more than 100 years ago, and were used for Swiss watches.
The first sulfur was grown in Switzerland.
With the advent of electronics, it turned out that artificial sulfur is a unique material, it has a lot of applications.
Certain devices on sulfur work better than on silicon.
For example, sulfur conducts heat faster.
It is ideal for making LEDs.
Remember the moment when, instead of 3 hours without recharging, laptops began to work 5-6 hours?
The battery life increased due to the saving on backlighting.
It was replaced with a LED, made on the basis of sulfur.
Then LEDs began to be used in televisions.
Thanks to this, it became possible to make them much thinner.
Well, for the consumer, the most understandable application of sulfur as a screen for a smartphone or smartwatch.
Five years ago, no one thought that sulfur would be widely used in smartphones.
The only, in fact, mass market for the use of sulfur was the LED market.
Apple, having installed a very good high-resolution camera in its iPhone,
found that if you close it with ordinary glass,
then even the smallest scratches on the picture, after we increase it,
turn into a rather serious defect.
And made a decision to use sulfur, which is not just optically transparent,
but is also a very solid material.
And today, about a quarter of the world's sulfur is already used in smartphones.
Sharp glass for iPhones.
The laser-controlled thermal chipping, or in short LUT technology,
was developed by Vladimir Kondratenko.
The most popular application of the technology was found in the Taiwanese Faxon Technology Group,
the main manufacturer of Apple products.
According to traditional technology, after cutting, the edge is polished and the chamfer is removed.
Moreover, it should be polished to semi-polishing.
The edge should shine.
The tests for strength are simple.
The screen is placed on two supports and is pressed from above.
After a mechanical cutting under a load of 8-10 kg, the glass breaks.
And after the laser, the glass is bent and only at 100 kg,
it crumbles into small fragments like scorched.
But there are only two such busts in the world.
The Russian inventor and the president of the Faxon Technology Group,
who said that there would be no others.
Only he and Professor Kondratenko, who developed this technology.
The bust is made using the technology of laser-controlled chipping in layers.
It often happens that a person's talent is manifested in many ways.
Kondratenko's office is decorated with paintings.
Painting allows Vladimir Stepanovich to switch, change the way of activity and not get tired.
With all his workload, he paints more than half a hundred paintings every year.
But Kondratenko himself considers himself a good engineer, not an artist.
Over the past five years, Vladimir Stepanovich has received 20 patents for inventions and useful models.
Of 173 of his patents, 65 were patented in industrially developed countries.
25 licenses for the use of his inventions in industry were acquired in Russia.
10 more were acquired by large foreign companies.
You see incredible things on these frames.
A person watches a video on a monitor.
A special device records the activity of his brain during viewing.
And the neural network of this activity quite accurately guesses what a person sees at the moment.
At the same time, the neural network does not know what is shown on the monitor.
That is, to put it simply, it reads the thoughts of a person.
This is the development of the laboratory of neuro-robotics of the MFTI and the company Neurobotics.
The start-up Neuralink Elon Musk is now working on the same task.
But the Americans, in order to interact with the brain,
implant thousands of electrodes into it and so far conduct experiments only on animals.
Russian development reads the signal from the surface of the brain and is completely safe for a person.
In the future, it will allow interacting with the outside world,
paralyzed people and will be a push for further improvement of the brain-computer interface.
By the way, such an interface is already active in the Russian company.
It allows a person to control a quadrocopter with the power of one thought.
And this is an oculogram video, the only device in the world for non-invasive vision correction.
In simple words, for the first time in world practice,
it became possible to treat the oblique eye without surgery and the so-called nystagma,
that is, involuntary, oscillatory movements of the eyes of high purity.
And it was invented by these two cute girls, Anastasia and Lidia Usanova,
together with their mother, a pediatric ophthalmologist.
Nine medical centers, including a micro-surgery of the eye named after Fedorov,
are already working on the proposed method.
The device also has other applications.
It is able to check the reliability of the provided information,
working in an order more effective than modern lie detectors.
Identify alcohol and drug intoxication by involuntary micro-movements of the eyes,
which cannot be controlled on purpose.
Slavic technology engines.
Our world needs more and more energy,
and already now huge demand is used for the technology of its economy.
60% of all electricity in the world is consumed by electric motors.
Thanks to the developed technology of the engineer Duyunov,
the most efficient electric motors in the world are created,
both for industrial purposes, and the motor of the wheel for transport.
The main advantages that a Slavic technology engine gets
is a reduction in the consumption of electricity from 10 to 40%,
a reduction in the cost of the engine by 30%
due to the smaller amount of copper used and electro-technical steel,
an increase in reliability,
engines burn less often and break down, service factor 2.5,
an increase in starting torque by 35%,
a decrease in starting currents by 35%.
Despite the obvious advantages of such engines,
in the comments under the early episodes,
where we talked about this technology,
a lot of skeptical opinions were expressed,
starting with the fact that this technology will not work,
ending with the fact that this is all nonsense,
if there are no analogues in the West,
then the technology is not needed by anyone.
But the technology is already being used successfully
in the field of modernization of industrial asynchronous electric motors.
For example, the SPBEC company modernizes asynchronous motors under the license.
The modification of the Kamaz Master team generators
using the Slavyanka technology
ensured the uninterrupted operation of the generator
in extreme conditions
and at the same time increased their power.
Motor wheels, electric bikes and electric cars
using the Slavyanka technology
were successfully demonstrated
at international exhibitions,
and now they are already being produced in series.
Two types of electric motors are industrially produced,
DA90S and DA100S,
for two-wheeled vehicles,
and they can already be purchased in Russia.
If you are interested,
the link will be in the description under this issue.
Here are the shots where a scooter
with Slavyanka technology pulls a 1.5 tonne Niva.
In September 2019,
South Korea signed an agreement
for a large number,
namely 10,000 electric motorcycles
and scooters with Slavyanka technology engines.
Two-wheeled vehicles
will be produced
on the basis of the K-Cross electric motorcycle.
The field of application of the technology is so extensive
that it can be used with equal success
in the production of a screwdriver
and in the creation of an icebreaker.
In 2019,
the company successfully passed
all financial and legal checks
from the state,
and on February 15,
as part of the Russian Investment Forum in Sochi,
an agreement was signed
between the OECD and the Moscow Special Economic Zone Technopolis.
According to it,
the company officially became a resident
of the Special Economic Zone.
Only a few selected companies
have been able
to participate in the development
of the project.
However,
a large number of checks
become residents of Technopolis.
In 2019,
there were six of them.
With each significant event
in the implementation of the project,
there are fewer and fewer sceptics,
since the company
goes to the finish line.
On June 13, 2019,
the project was signed
by the Moscow Special Economic Zone Technopolis.
The signing of the documents
took place in a solemn atmosphere,
with the company leaders
as well as members of the Czech Embassy
and Moscow officials present.
Thus,
in just two years,
the company attracted
most of the necessary investments
and went to the finish line,
starting preparation
for the construction of an engineering center
in Moscow.