Jari and Žiga going through their guns and gear loadout for Finnish Brutality 2024. Now that Finland is a part of NATO forces @varusteleka finally releases a line of high quality MultiCam tactical gear and apparel. MultiCam in Finland was something we never expected to see :) #UniformAndArms #AR15 #TacticalOptics #CombatUniform #FirearmsReview #FinnishBrutality #WWSD #ShortBarrelRifle #Aimpoint #PrimaryArms #Holosun #CombatGear #Multicam #Military Equipment
#Military Equipment Equipment
What is the best AR-15 barrel length—and are ultra-short 5.56 rifles actually useless? James visits the FBI’s Ballistic Research Facility to speak with veteran FBI ballistician Robert about AR-15 barrel length, projectile weight, velocity, twist rate, fragmentation, expansion, and terminal performance. Robert explains why muzzle energy alone tells you very little, why the FBI prefers expanding projectiles over traditional fragmenting ammunition, and how every bullet has an optimal performance window. Depending on the ammunition and intended distance, a longer barrel can even drive a projectile too fast and produce worse terminal performance at close range. We also get direct answers on the practical differences between 7.5-, 11.5-, 14.5-, 16-, 18-, and 20-inch AR-15 barrels. For law enforcement and home defense, Robert identifies an 11.5-inch barrel with a 1:7 twist and a properly selected 64- to 75-grain bonded projectile as the practical sweet spot. He also explains why 7.5-inch 5.56 rifles are not necessarily worthless—provided their ammunition and engagement distance are properly matched. This is not internet theory. It is a detailed discussion of actual projectile testing, terminal-ballistics standards, and the variables that determine whether a 5.56 round performs as designed.
Here's a review of the Manticore Arms AR NightBrake. I use the Battlecomp 1.0 as a comparison device in a few tests, do some night shooting, and talk about the specs and what I think of it overall.
Heres a review of the Battlecomp 1.0 on my 16'' mid lentgh A2 profile CHF barrel (FA BCH & carbine buffer). I do some timed shooting, night fire and discuss the pros and cons of the comp.
I get a lot of questions about vertical foregrips; what I think of them and how to use them generally so I tried to cover that here. As I state in the video, if you use a different technique and it works for you---keep on keeping on.
A quick how-to video for installing the Magpul XTM Hand Stop Kit on a 1913 rail.
Just a quick 'how to' for shaving down an AR front sight so it can be used as a low profile gas block under a free float rail.
This is a very basic video for the brand new AR owner who doesn't know anything about the platform (we were all there once guys...). I show in detail how to break down the rifle, how to clean it, and how to lubricate it to ensure proper functioning. Before someone says the old "I do it X way and it's way better!" --- I know there are other ways that work as well. The key is keeping the gun lubricated and relatively free of carbon to ensure proper performance. I pretty much endorse all CLPs (with the exception of RemOil--it evaporates/runs off way too fast) for use buy use Mil-Spec CLP myself personally. Synthetic motor oils from 0w-10w seem to work well for lubrication as well. As far as greases go, I recommend a lithium based grease with a broad operating temperature range. I've used expensive 'gun' greases and found 0 difference in performance with the grease used above or the Mobil 1 brand with similar specs to the grease in the video---both work great. Almost all of the handguns you see in my reviews have this on their rails.
Magpul coupler review
I do some shooting with the Colt 6920 and go over it's features.











