Learn the fundamentals of binary and Boolean operations in ladder logic using Siemens TIA Portal. This is Part 1 of my PLC programming tutorial series covering ladder diagram programming from the ground up. In this tutorial, I cover: Momentary coils and how they operate Normally open (NO) and normally closed (NC) contacts Positive and negative edge detection (one-shots) Set/Reset and Latch/Unlatch instructions Whether you're just getting started with PLCs or brushing up on the basics, this video breaks down the core building blocks you'll use in almost every ladder logic program. Resources PLC used in this tutorial: https://amzn.to/4p90T8d Support the channel:https://www.patreon.com/LeMasterTech Timestamps 00:00 Introduction and Background 01:57 Setup and Adding Input and Output Tags 05:13 Examine If Open (XIO) or Closed (XIC) Normally Open (NO), or Closed (NC) 09:45 The wiring in use for this tutorial 12:39 Using two digital inputs to control four digital 15:21 Set and Reset, Output Latch and Unlatching Commands 17:43 Positive Edge and Negative Edge One Shot Conditionals 21:55 Outro and Thank you!

