# Lexus Carplay Upgrade 4 Month Review and Tips Link to installation video: https://youtu.be/I8eCbVxB6e0 * Have used it for 4 months and thousands of miles, * on local, high-way, and out of state trips. * Family members who like and don't like technology. * Overall, very positive experiences. ## Tips and Settings Correction first: * Don't stick the Antenna to metal as there can be interference. - The manual says that but I ignored it in my installation (not correct). - Practically, I haven't noticed a problem and it may impact some of your installation/connections. Tips: 1. AUX on the dash and wheel control; no need to long press Menu to switch back to the original Lexus infortainment. 2. Remote lever/touchpad setting, e.g. remote lever 3. Phone audio echo/loop (for the other party): change Mic Pre-config for IS or LX. ## Connection 1. Bluetooth and Wifi on, occassionally reconnect. 2. USB: charger and wired carplay, always works; but may have to give permission. * USB cable does not affect opening or closing of the glove box. 3. Multiple devices, automatically connect to one; USB wired connection is picked up first. ## Control 1. On remote lever or joystick, make sure the setting is correct. 2. Left and right (most used) for horizontal and vertical navigation. 3. Up and down (rarely used) to FAST vertical scroll. 4. This is one feature I don't fully appreciate, but it works. ## Key Features ### SIRI 1. SIRI is the lifesaver, especially on the trip. 2. You can access almost everything available to Carplay via Siri. 3. Long press Remote Lever, Touch Pad or one of the Enter keys. 4. Lexus Voice Assistant on wheel remains the same, and cannnot be used to activate Siri. ### Phone Calls 1. Again, use Siri to make phone calls or read messages, etc. 2. Good news: On-wheel buttons to receive and reject (hang up) calls WORK! * Use them to receive/reject incoming calls * Or to activate the phone/contact page on Carplay. 3. You can still use Remote or Phone to look up and make calls. ### Maps and Modes 1. Google Maps and Apple Maps both work nicely. 2. Apple Maps works seamlessly with Siri * There appears to be a way to activate Google Maps from Siri but I haven't figured that out. 3. I use TuneIn radio while on Maps: * Full Maps or split with Maps and Now Playing * Automatically mute/reduce the volume on radio, when there is voice guidance or incoming call. * Sound quality is great! Though I normally only listen to talk show radio and can be biased. 4. Alternatively, with on-wheel control, you can easily (manually) switch to other media sources, e.g. AM/FM. ## Long Term and Long Trips * Overheat? No problem with mine. But some people place the unit in the glove box. * It is in the radio unit on the AC passage. * On the road, Siri is handy, receive calls on the wheel, and other carplay control (brief) on the remote (right-hand side). ## Android Auto 1. Downloaded Autolink (third-party app) but that was not working/used. 2. Use the built-in Android Auto (on Android One device). 3. Tested USB and WiredAuto, worked fine. 4. Likewise to activate Hey Google/Assistant, by long press Remote Lever, Touch Pad or Enter. 5. Didn't use Android Auto extensively; tested it with an outdated Android One phone and Maps with offline (downloaded) data. ## Different Configurations * Wiring can be different depending on your model and configuration. Make sure to check and get support from the seller. * For example, for some models, there is an additional Audio Ground Wire to be connected separately. * Some people reported having to update firmware on the carplay unit. * It supports 360 cameras, either original Lexus cameras or aftermarket ones. But I haven't tested it as this is not part of my model/configuration. ## Things to Know 1. Installation can be tricky, and wiring varies on configurations. 2. Remote lever is not the best control but works just fine. 3. On-wheel buttons are not fully utilized, only the two phone-related buttons. Would be good to use other buttons such as arrow keys to navigate the carplay system. 4. If you have to use other audio sources such as AM/FM or other bluetooth audio input, you won't be able to have AUX and audio from carplay at the same time. Unlike the original Lexus infotainment, which can give your voice guidance regardless of your audio mode. Overall, my experiences have been overwhelmingly positive so far. -- Hope this is helpful and informative. If there are other questions or issues not covered in this video, please feel free to ask in the comments. Stay tuned as I will continue to share tips from my journey of car care and repairs. Appreciate your attention to Professor's Garage. God bless!
# 2017 Lexus RX350 Infotainment/Navigation Upgrade to CarPlay ## Supply 1. CarPlay & Android Auto module + interface cables In the video, I install a RoadTop CarPlay unit for Lexus: https://www.ebay.com/itm/384400476740 * I have NO affiliation with them and hope to post a review video after some use. * For now, I've used CarPlay features but will test Android Auto too. ## Tools 1. Panel removal tools (plastic) 2. Ratchet wrench 3. 10mm socket 4. Some towels ## A. Radio Unit Removal 1. Open storage lid and remove central console panel/trims. 2. Remove (silver) trims around the radio. 3. Remove black trim where Start/Stop button is attached. 4. Disconnect Start/Stop connector. 5. Remove two 10mm bolts holding the radio: + one on the driver side + the other on the passenger side 6. Push down shift boot and remove shift knob. 7. Cover the shift stick with towels (to protect the radio unit later). 8. Remove the radio unit, and disconnect the connector at the top. ## B. Screen Removal 1. Remove front and back trims around the screen. 2. Remove back cover of the screen. 3. Remove three 10mm bolts/nuts on the screen bracket. 4. Lay towels in the front. 5. Remove the screen and place it on the towels. ## C. Connect CarPlay Unit Cables 1. Connect LVDS cables. 2. Connect CAN cables. 3. Connect USB / Video cables. 4. Connect RF Antenna cable. 5. Change Toggle Switch according to instructions. ## D. Connect to Radio Unit Host For each connector, chain them together this way: 1. Remove the original cable; 2. Plug it to the female cable to CarPlay; 3. Plug the carplay male to the host socket, where the original cable is removed. Do this for the following cables/connectors: 1. Power or CAN cables. 2. Audio out cables. ## E. Connect to Screen 1. Route LVDS cable from the back of the radio to screen. 2. Chain the LVDS connectors with the original cable/connector. ## F. Test CarPlay 1. Reconnect Start/Stop and start the car. 2. Switch Audio Source to AUX. 3. Turn your phone's wifi, bluetooth, and connect to CarPlay. 4. Test the features. ## G. Reassembly 1. Optional: Route the USB cable to glove box. The unit has wireless carplay so USB is not required. 2. Place the CarPlay unit in the back behind Radio. Arrange the cables and tuck them in the back. 3. You can stick the antenna to the side of the radio box. 4. Put the radio unit back, attach to the clips, 10mm bolts, and reattach the trims. 5. Reinstall the screen with 3x10mm bolt/nuts, back cover, front and back trims. DONE. Hope this video is informative. Be safe, stay dirty. Enjoy the work! God bless!


