Hard floors in schools, stores, offices, and medical buildings collect wax, dirt, and scuff marks over time. When daily mopping and buffing no longer restore the surface, facility managers often turn to a strip and wax floors service. This article explains what the work involves, how to choose a provider, how long the process takes, and which factors shape the final cost.
What a Strip and Wax Floor Service Does
Floor stripping and waxing is a two-part process. Stripping removes old layers of finish, along with embedded dirt and residue, using a chemical stripper and a floor machine. Waxing, also called finishing, applies new coats of polish that protect the surface and give it an even appearance. A finished floor resists moisture, reduces wear on the tile, and makes routine cleaning easier. Without it, bare tile absorbs dirt and wears faster.
The process is most common on vinyl composition tile, sheet vinyl, linoleum, and some sealed concrete. Natural stone and unsealed wood require different methods, so a provider should confirm the floor type before any work begins.
Signs a Floor Needs Stripping
Several conditions suggest that surface cleaning is no longer enough:
- A yellow or dull finish that stays after cleaning
- Scuffs and heel marks that buffing cannot remove
- Wax buildup along edges, corners, and baseboards
- Peeling, cloudy, or uneven patches of finish
- A sticky or slippery feel after mopping
Steps to Hire a Strip and Wax Floors Service
Step 1: Define the Floor Type and Area
Before contacting providers, the property owner should note the flooring material, the total square footage, and any areas with heavy wear. Photos of problem spots help providers prepare accurate estimates.
Step 2: Verify Experience and Insurance
A reputable company should provide references, proof of general liability insurance, and workers' compensation coverage. Insurance protects the property if a floor, wall, or piece of equipment is damaged during the job. Training records for crew members and details about the products used are also reasonable requests.
Step 3: Request an On-Site Evaluation
Many providers inspect the floor in person before quoting. An inspector checks the number of finish layers, the condition of the tile, and any moisture or damage issues. A phone estimate based only on square footage may miss these details.
Step 4: Compare Written Proposals
Each proposal should list the scope of work, the number of finish coats, the products used, the schedule, and the total cost. Comparing proposals line by line shows where one provider includes services that another leaves out, such as furniture moving or baseboard cleaning.
Step 5: Confirm Scheduling and Safety Plans
Stripping uses wet chemicals, and fresh finish needs time to cure. Many businesses schedule the work after hours or over a weekend. The provider should explain how it will mark wet floors, ventilate the space, and keep foot traffic away from areas that are drying.
How Long Floor Stripping and Waxing Takes
The timeline depends on the size of the space and the condition of the existing finish. A small room may be finished in one day, while a large commercial floor can take several days. Larger facilities such as schools often divide the building into zones and finish one zone at a time so that hallways and entrances stay usable. The work generally follows this order:
- Furniture and equipment are moved, and edges are prepared.
- Stripper is applied and left to dwell for several minutes.
- A floor machine scrubs the loosened finish, and a wet vacuum removes the residue.
- The floor is rinsed, neutralized, and allowed to dry.
- Several thin coats of finish are applied, with drying time between each.
Drying between coats often takes 30 to 60 minutes. Light foot traffic is usually allowed after several hours, while full curing can take up to 72 hours, depending on the product and the room temperature.
What Affects the Cost
Providers usually price the work by square foot or by project, and the final amount depends on several factors:
- Total area and layout of the space
- Number of existing finish layers and their condition
- Number of new finish coats and the type of product
- Furniture moving and edge or corner detail work
- After-hours or weekend scheduling
- Repairs to chipped tile or damaged seams
Written estimates allow a fair comparison. A very low bid may leave out steps such as full rinsing, which can cause the new finish to peel early. Property owners may also ask how much each added service would change the total.
Questions to Ask Before Hiring
A short list of questions helps confirm that a provider fits the job:
- How many coats of finish will be applied?
- Which products will be used, and are they low odor?
- How will the crew protect walls, doors, and baseboards?
- What is the cure time before normal use resumes?
- Is there a written policy if a problem appears after the service?
Caring for Floors After Service
Routine care extends the life of a new finish. Dust mopping removes grit that scuffs the surface, and a neutral cleaner avoids breaking down the polish. Walk-off mats at entrances catch dirt before it reaches the floor. Periodic buffing or screening and recoating can refresh the finish without a full strip, which reduces how often complete stripping is needed.
Professional Floor Care Options
Commercial cleaning companies handle this work with trained crews and commercial equipment. Sublime Cleaning is one example of a company that offers a strip and wax floors service along with routine janitorial care, which allows a property to manage both under one contract. Property owners can request an evaluation, review a written scope of work, and arrange a schedule that suits business hours.
Conclusion
Hiring a strip and wax floors service involves a clear sequence: identify the floor type, verify credentials, request an on-site evaluation, compare written proposals, and confirm the schedule. Most jobs take from one day to several days, including cure time, and the cost depends on area, floor condition, finish type, and scheduling needs. Floor stripping and waxing restores a worn surface when routine cleaning no longer works, and careful planning helps the result last.



Comments