When a project requires a strong permanent bond, adhesive tape can offer a cleaner alternative to drilling, screws and other mechanical fixing methods. For businesses looking for a VHB tape alternative, STIKON's range of high-bond acrylic tapes provides several options for applications involving metals, plastics, glass, wood and other solid surfaces. 

STIKON's S-Bond Clear range uses pure acrylic gel tape designed for long-term bonding. The clear construction is particularly useful where the appearance of the adhesive joint matters, as the tape can create a near-invisible bond when used with clear materials such as glass and Perspex. 

Why Consider a High-Bond Tape?

Traditional mechanical fixings can require drilling holes or using additional hardware. High-bond adhesive tape provides another way to join surfaces while keeping the finished appearance clean. STIKON describes S-Bond Clear as a heavy-duty clear bonding and mounting tape for permanent applications, with options covering thicknesses from 0.25mm to 3mm. 

The choice of thickness can be important. A thinner tape may suit applications where maintaining a low profile is important, while thicker material can provide greater gap filling and cushioning between surfaces. STIKON's range allows the tape specification to be matched to the particular application.

The S-Bond Clear range is intended for materials including metals, powder-coated surfaces, glass, acrylic, Perspex, plastics, painted wood and ceramics. It is also described as weatherproof and UV resistant, making it suitable for selected indoor and outdoor applications. 

Applications for VHB-Style Bonding

High-bond acrylic tapes can be useful across several sectors. STIKON lists applications including architectural glazing assemblies, glazing cassettes in composite doors, sliding doors, furniture, glass partitioning and Perspex point-of-sale units. 

The tape's ability to spread the load across the bonded area is another useful characteristic. Rather than concentrating pressure at individual fixing points, an adhesive tape can distribute the bond across the surface. This can be helpful when working with finished or visible components.

Surface preparation remains important. STIKON recommends cleaning the surfaces before application and applying pressure to the tape. Where possible, pressure should be maintained for 24 hours to support the bonding process. 

For customers searching for a VHB tape alternative, the key consideration should be the actual application rather than simply selecting the strongest tape available. Surface type, environmental conditions, required thickness and appearance all influence the right choice.

STIKON's high-bond range provides clear acrylic gel, acrylic foam and other high-bond options for different requirements. With multiple thicknesses and widths available, the tape can be selected and supplied according to the needs of the individual project.