No residence becomes a house in a complete sense without a roof. A roof not only protects us from different unfriendly weather conditions but also makes us feel safe. And when that roof of our house gets leaked, it becomes very hard for us to detect the actual reason behind such leakage unless we get some expertise regarding the same.
Early detection of the actual leakage reason helps us find the solution early. It prevents the ceiling from getting further leaks and damage. Let's discuss some common reason for roof leakage and the ways to fix those leaks by taking the support of the roof leakage services.
How to Spot Roof Leaks and Get Them Fixed Quickly
1. Pipe Boot Not Working
Pipe Boot is a long-shaped device that is installed at the ceiling to the roof. Its function is roof flashing. These types of pipes are made of different materials such as lead, copper, synthetic rubber, etc.
As these materials never last forever, the pipe boot after a certain time develop cracks and water leakage happens from that place. As the water leaks from the place where the pipe is situated, you can easily detect that the reason for leakage is the pipe boot failure can do the necessary things to repair it or exchange it with a new one.
Solution:
To repair the leakage, put a rubber collar through the neoprene pipe boot and hide the leakage area so that no more water can seep in through the cracks. Or, replace the entire pipe boot.
2. Nails Not Hammered Appropriately
If your house's roof is shielded with shingles and the sheets are joined by nails, sometimes leakage happens due to the improperly driven nails. At places some nails instead of passing through the sheets for joining them may by mistake, get driven in sideways.
As a result, the sheets at those places instead of sitting properly on one another remains uplifted due to those side-driven nails, thus making passage for the rain water to get inside the house through the leaked roof.
Solution:
Entrust the work to an expert roofer and ask him to seal the shingles properly. If the sheets doesn't sit on one another properly before hammering the nails, he should apply some ice water in between the sheets or any sealant to seal them first.
3. Roof Flashing Issues
Sometimes a metal remains attached in the roof of your house. That metal works by hindering the water to sit on the roof, thus making way for it to get the water flushed into somewhere else. It may happen that this metal gets damaged due to certain problem or may not have been installed at the required place till now.
Or, the installation person may have made some mistake while doing its installation. In such cases, issues arise in case of normal roof flashing. If you notice that the water is seeping from the area with missed flashing metal or the flashing device has been damaged and your walls are facing water seepage due to step, counter and apron flashing, etc, and then know that it is time to call your house's roof leakage services.
Solution:
Replace defective flashing. Install the shingles properly again by using ice water shield or necessary sealage so that the sheets falls perfectly on one another.
4. Debris in Gutters
Some house's roof slopes are shaped like valleys. In such cases, two or more of them joins with one another in such a way that a V shape is formed. This V shape leads the rain water towards the gutter. However, in exceptional cases, this V shape that moves towards the gutter, instead of completing it's course, pauses in the midway.
Problem arises if unwanted debris blocks the gutter. At such a situation, the gutter fails to hold the rain water. In such cases, the rain water reverses back and goes to the roof, resulting in the seepage of water, owing to leakage.
Solution:
Install a flashing system. It will help your gutter stay free of debris. So, water can by no means get seeped into the roof.
5. Chimney Leaks
Chimney leaks, certainly is a common thing in most of the household, especially in those whose chimneys are located near the flashing metal. This flashing device usually remains below the shingles. Whenever it rains continuously, the position of the chimney becomes weak. This is because rain causes the bricks and mortar joints to loosen, thus seepage of water from the roof.
Solution:
Repair the flashing and get in touch with a reputed carpenter who is experienced in this field to perform the job.
6. Aging Roofing Materials
Everything has a lifespan whether it is a human being or an immobile object. So, the different types of materials you use for building your roof also ages over time. Once such roof materials such as shingles, nails, etc ages, and their holding power gradually starts diminishing. Gradually cracks develop in them or they keep separating from one another very slowly. This directs the rainwater, snow water, etc inside the house through the gaps that are created by such separation.
Solution:
Either buys new roofing materials and makes a new roof with them after dismantling the old roof. Or, you can expand the life of the old roof by painting it fully with a newly purchased sealant. This sealant will act as a protective coat over the old roof, seals the cracked or separated places and prevents water to get inside the house by permeating the roof.
Conclusion
So, detecting roof leakage reason is not that hard if you know how to spot the above 7 problems. Spotting these problems on time calls for early repair of those leakages and throwing out the main problem from the root. It will save your money from spending on expensive water damages of the roof.
In adverse situation roof repair kl services may come to your help. After all, repairing your leaked roof is necessary to make your health secured. Once called a roof leakage expert will examine your entire roof and try to detect the actual cause for the leak.